OSHA SearchOSHA records by employer

J and K Construction: OSHA inspections and violations

St. Ansgar, Iowa · Commercial and Institutional Building Construction · NAICS 236220

2inspections
7citation items
$3,063current penalties
Oct 2, 2018last inspection

Since 1996, OSHA inspectors have visited J and K Construction in Iowa 2 times.

The most recent inspection opened on Oct 2, 2018 on a referral, in Tripoli.

In all, OSHA issued 7 citation items: 5 serious and 2 other-than-serious.

The proposed penalties came to $3,910; today they stand at $3,063, 22% less.

The rule cited most here is 1926.21 (construction safety training), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. J and K Construction averages $1,000 across 1 cited inspection.

J and K Construction: OSHA citation items per year, 1996 to 2018
Citation items per year, by inspection date.

Iowa · latest 90 days of OSHA records

63employers cited

Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Iowa

Checking a subcontractor, a client or your own company? Watch J and K Construction and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343506556 OPENED OCT 2, 2018Closed

Referral · Complete · Safety · 2 employees at the site · Closed Jan 17, 2019

204 1st Ave Se, Tripoli, IA 50676 · Commercial and Institutional Building Construction · OSHA's record · Phone and website on Google Maps

Incident on Sep 18, 2018: Employee amputates toe when saw used to cut corrugated steel

At 2:30 p.m. on September 18, 2018, an employee was working with two coworkers to replace a five foot by five foot section of a bin floor made of one-eighth inch corrugated steel. The employee, who was not wearing steel toes boots, took over for a coworker to finish cutting the section of steel out using a metal cutting saw (Milwaukee 8 inch Metal Cutting Saw, Model 6370-20), who went to take a short break. The employee had cut approximately seven inches when the saw kicked back and cut through his boot and big toe. The employee was hospitalized for an amputation of his big toe on the right foot.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.96 · Occupational foot protection
Serious$1,847$1,000Oct 24, 2018Final
Citation 1, item 1b
29 CFR 1926.21(b)(2) · Construction safety training
Serious$0$0Oct 24, 2018Final

Inspection 115081275 OPENED AUG 2, 1996Closed

Accident · Partial · Safety · 10 employees at the site · Closed Mar 3, 1997

Grain Millers (iowa) Inc., 218 North, St. Ansgar, IA 50472 · OSHA's record · Phone and website on Google Maps

Incident on Jun 11, 1996: Employee's fingers amputated in airlock machine

At approximately 1:30 p.m. on June 11, 1996, Employee #1 was instructed to go to the mezzanine of a mill building to cut an inspection door in the baghouse filt er's hopper throat for the specialty grain cleaning system. The area where the h ole was to be cut was 14 ft above the floor. To gain access to this area, an app roximately 2 in. by 10 in. by 12 ft plank was supported by the mezzanine's guard rail on one end and the airlock machine on the other. It was secured using two " C" clamps. Sitting on the work platform, Employee #1 moved to the end of the pla nk to saw an approximately 10 in. opening. After he had completed cutting the in spection hole and removed the piece of metal, he reached through the opening wit h his left hand to remove any metal filings that might have fallen inside the ai rlock. The machine was operating, and the blades amputated his index and middle fingers below the first knuckle. Employee #1 failed to de-energize and lock out the equipment prior to starting the modification. Instead, he only asked the mil ling superintendent and another coworker if the machine was operating.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.20(b)(1) · Construction safety programs
Serious$825$825Oct 2, 1996Closed
Citation 1, item 2
29 CFR 1926.21(b)(2) · Construction safety training
Serious$825$825Oct 2, 1996Closed
Citation 1, item 3
29 CFR 1926.451(a)(3) · Scaffolds, general requirements
Serious$413$413Oct 2, 1996Closed
Citation 2, item 1
29 CFR 1200003 4
Other-than-serious$0$0Oct 2, 1996Closed
Citation 2, item 2
29 CFR 1200006
Other-than-serious$0$0Oct 2, 1996Closed

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.20 · Construction safety programs

29 CFR 1926.20(b)(1)

(b) Accident prevention responsibilities. (1) It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part.

29 CFR 1926.21 · Construction safety training

29 CFR 1926.21(b)(2)

(2) The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(a)(3)

(3) Each suspension rope, including connecting hardware, used on non-adjustable suspension scaffolds shall be capable of supporting, without failure, at least 6 times the maximum intended load applied or transmitted to that rope.

29 CFR 1926.96 · Occupational foot protection

Other commercial and institutional building construction employers in Iowa

Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.