J.D. Graphic Co., Inc. has 3 OSHA inspections on record in Illinois, the first in 2009.
OSHA's last visit started on May 30, 2017 on a referral, in Elk Grove Village.
Across those inspections OSHA issued 15 citation items: 8 serious, 2 repeat and 5 other-than-serious.
OSHA proposed $61,410 in penalties. After settlements and reviews the total is $33,200, down 46%.
Most often, OSHA cited 1910.147, lockout/tagout (4 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. J.D. Graphic Co., Inc. averages $31,500 over 1 cited inspection in that time.
J.D. Graphic Co., Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
428employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
Incident on Apr 3, 2009: Employee crushes, degloves hand while operating press
At approximately 9:43 a.m. on April 3, 2009, Employee #1 was operating a Heidelb erg Harris printing press (Model Number PRINTSTREAM-100, Serial Number OM3399-6) . Employee #1's job was to help the press man operate the printing press. Accord ing to Employee #1, the paper broke from its continuing roll because it was the soft type of paper. Employee #1's supervisor stopped the press and spliced the p aper then he put the machine on "inch" mode so that the paper roll could web its elf through the rollers. The paper roll began to go backwards and started unrave ling quickly. Employee #1 placed his right hand near the roll and the paper wher e it was going backwards in order to stop it in place. Employee #1 stated he cou ld not tell if the roll was moving or not. The roll pulled Employee #1's hand be tween the rollers and squeezed his hand through the half-inch opening. Employee #1 tried to pull his hand back but could not. Employee #1 felt his hand getting crushed. Then, Employee #1's hand went through the rollers but part of his palm was still stuck between the rollers and the rollers started tearing his skin off of his right hand. Employee #1 tried to turn the machine off with the emergency button but his right hand was caught in the machine and the emergency stop butt on was on the right side of the machine. Employee #1 tried to swing his foot or left hand to turn the machine off. The machine finally turned off. Once the mach ine was stopped, Employee #1 still could not get his hand out from between the r ollers since the opening was still only half an inch. Employee #1's hand was a l ot thicker than half an inch. Employee #1 told coworkers to remove the top rolle r with a wrench by loosening it to free his hand. A coworker did remove the roll er, and they freed Employee #1's hand. Employee #1 hand was badly damaged. The r emaining skin on Employee #1's hand was just hanging off; it was almost a comple te degloving. A coworker called emergency services, and the ambulance took Emplo yee #1 to the hospital. The medical staff gave Employee #1 morphine because he w as in so much pain. That same evening at approximately 8:00 p.m., the doctors pe rformed surgery on Employee #1's hand. Employee #1 was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Elk Grove Village site logged 1 recordable injury or illness among about 40 workers: 2.4 per 100 full-time workers, against a median of 2.0 for its industry. Those cases cost 1 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
J.D. Graphic Co., Inc.
Elk Grove Village · 2025
40
1
1
2.4
2.0
Included with any plan: 7 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:
29 CFR 1910.1200(h)(1)
(h) Employee information and training. (1) Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.