JBM, Incorporated has one OSHA inspection on record in Tennessee.
OSHA opened it on Oct 20, 2015 as a planned inspection, in Knoxville.
From that inspection OSHA issued 5 citation items: 1 serious and 4 other-than-serious.
OSHA proposed $1,900 in penalties and the amount has not been reduced.
Most often, OSHA cited 1910.147, lockout/tagout (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. JBM, Incorporated averages $1,900 over 1 cited inspection in that time.
JBM, Incorporated also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Tennessee · latest 90 days of OSHA records
353employers cited
Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Knoxville site logged 5 recordable injuries or illnesses among about 101 workers: 5.1 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 136 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
JBM Inc.
Knoxville · 2024
101
5
2
5.1
3.6
JBM, Inc.
Knoxville · 2021
106
4
1
3.8
3.6
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
29 CFR 1910.147(c)(7)(iv)
(iv) The employer shall certify that employee training has been accomplished and is being kept up to date. The certification shall contain each employee's name and dates of training.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Other sheet metal work manufacturing employers in Tennessee
Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.
