OSHA SearchOSHA records by employer

JDR Enterprises, Inc.: OSHA inspections and violations

Madison, Georgia · All Other Plastics Product Manufacturing · NAICS 326199

3inspections
6citation items
$31,853current penalties
Feb 26, 2021last inspection

Since 2015, OSHA inspectors have visited JDR Enterprises, Inc. in Georgia 3 times.

The most recent inspection opened on Feb 26, 2021 on a referral, in Madison.

In all, OSHA issued 6 citation items: 6 serious.

The proposed penalties came to $48,069; today they stand at $31,853, 34% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. JDR Enterprises, Inc. averages $10,618 across 3 cited inspections.

JDR Enterprises, Inc. also files yearly injury logs with OSHA, summarized below.

It reported 3 severe injuries to OSHA since 2015.

JDR Enterprises, Inc.: OSHA citation items per year, 2015 to 2021
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

146employers cited

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch JDR Enterprises, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345167118 OPENED FEB 26, 2021Closed

Referral · Partial · Safety · 74 employees at the site · Closed Aug 27, 2021

1630 N. 5th St., Madison, GA 30650 · All Other Plastics Product Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Feb 20, 2021: Employee fractures fingers when struck by spinning cutters w

At 9:00 a.m. on February 20, 2021, an unknown employee was reaching into an open machine using a putty knife to assist in the operation. While attempting to adjust the machine, the putty knife made contact with the spinning cutters inside the machine. The knife became caught, striking the employee's fingers, resulting in fractures. The employee was immediately treated for the injury and was transported to a local hospital. The employee was admitted to the hospital for further care due to the severity of the fractures.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$10,513$7,359Aug 4, 2021Final

Inspection 344680277 OPENED MAR 4, 2020Closed

Referral · Partial · Safety · 73 employees at the site · Closed May 11, 2020

1630 N. 5th St., Madison, GA 30650 · All Other Plastics Product Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Mar 2, 2020: Employee fractures, dislocates hand when caught in machine r

At 3:15 p.m. on March 2, 2020, an employee working for a plastics manufacturer was feeding fabric into a roller system when he caught his hand in the rollers. The employee fractured and dislocated his hand and was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.178(q)(6) · Forklifts and other powered industrial trucks
Serious$7,422$4,453Apr 15, 2020Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$10,390$6,234Apr 15, 2020Final
Citation 1, item 3
29 CFR 1910.219(c)(4)(i) · Belts, pulleys and power-transmission parts
Serious$7,422$4,453Apr 15, 2020Final
Citation 1, item 4
29 CFR 1910.219(f)(1) · Belts, pulleys and power-transmission parts
Serious$7,422$4,453Apr 15, 2020Final

Inspection 340645738 OPENED MAY 19, 2015Closed

Planned · Complete · Safety · 40 employees at the site · Closed Oct 19, 2015

1630 N. 5th Street, Madison, GA 30650 · Plastics Pipe and Pipe Fitting Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$4,900$4,900Sep 10, 2015Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2024, the Madison site logged 6 recordable injuries or illnesses among about 53 workers: 11.8 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 25 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
JDR Enterprises
Madison · 2024
53 6111.82.6

Included with any plan: 3 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.

Feb 20, 2021, Madison: Hospitalization · fractures · hand(s), unspecified

A maintenance worker was clearing a jam in a pelletizer. The employee was using a putty knife near the rotating blade when the putty knife was caught and spun, cutting the employee's hand and breaking his finger.

Mar 2, 2020, Madison: Hospitalization · avulsions, enucleations · hand(s), unspecified

An employee was feeding raw product into an extruding machine when their hand was caught in a roller. The employee sustained a partial de-gloving injury.

Jun 16, 2015, Madison: Amputation · amputations · fingertip(s)

A winder operator on the end of the production line suffered a fingertip amputation when his hand was caught in the push portion of the winder.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.178(q)(6)

(6) Industrial trucks shall not be altered so that the relative positions of the various parts are different from what they were when originally received from the manufacturer, nor shall they be altered either by the addition of extra parts not provided by the manufacturer or by the elimination of any parts, except as provided in paragraph (q)(12) of this section. Additional counterweighting of fork trucks shall not be done unless approved by the truck manufacturer.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

Other all other plastics product manufacturing employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.