JMD Industries, Inc.: OSHA inspections and violations
Hudson, New Hampshire · Electroplating, Plating, Polishing, Anodizing, and Coloring · NAICS 332813
2inspections
3citation items
$0current penalties
May 29, 2025last inspection
OSHA has inspected JMD Industries, Inc. 2 times in New Hampshire since 2013.
The latest one began on May 29, 2025 as a planned inspection, in Hudson.
Those inspections ended with 3 citation items: 3 other-than-serious.
None of the citations carried a penalty.
Hexavalent chromium comes up most often in these citations: 2 items under 1910.1026.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and JMD Industries, Inc. averages $0 (1 cited inspection).
JMD Industries, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
New Hampshire · latest 90 days of OSHA records
52employers cited
Get notified the morning OSHA posts each new citation in New Hampshire: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Hudson site logged 2 recordable injuries or illnesses among about 72 workers: 2.7 per 100 full-time workers, against a median of 3.2 for its industry. Those cases cost 6 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
JMD Industries, Inc.
Hudson · 2024
72
2
2
2.7
3.2
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(2) Scheduled monitoring option. (i) The employer shall perform initial monitoring to determine the 8-hour TWA exposure for each employee on the basis of a sufficient number of personal breathing zone air samples to accurately characterize full shift exposure on each shift, for each job classification, in each work area. Where an employer does representative sampling instead of sampling all employees in order to meet this requirement, the employer shall sample the employee(s) expected to have the highest chromium (VI) exposures.
29 CFR 1910.1026(d)(2)(vi)
(vi) The employer shall perform additional monitoring when there has been any change in the production process, raw materials, equipment, personnel, work practices, or control methods that may result in new or additional exposures to chromium (VI), or when the employer has any reason to believe that new or additional exposures have occurred.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(a)(5)
(5) If the truck is equipped with front-end attachments other than factory installed attachments, the user shall request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered.
Other electroplating, plating, polishing, anodizing, and coloring employers in New Hampshire
Alert subscribers get notified of each newly cited employer in New Hampshire the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.