Jomar Machining and Fabricating: OSHA inspections and violations
Middlebury, Indiana · All Other Miscellaneous Fabricated Metal Product Manufacturing · NAICS 332999
1inspections
3citation items
$14,700current penalties
Feb 20, 2025last inspection
OSHA has inspected Jomar Machining and Fabricating once in Indiana.
The inspection began on Feb 20, 2025 on a referral, in Middlebury.
That inspection ended with 3 citation items: 3 other-than-serious.
Penalties were first proposed at $14,700 and still stand at $14,700.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Jomar Machining and Fabricating averages $14,700 (1 cited inspection).
Jomar Machining and Fabricating also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Indiana · latest 90 days of OSHA records
81employers cited
Get notified the morning OSHA posts each new citation in Indiana: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Jomar Machining and Fabricating and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Middlebury site logged 2 recordable injuries or illnesses among about 79 workers: 3.2 per 100 full-time workers, against a median of 2.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Jomar
Middlebury · 2025
79
2
0
3.2
2.1
Jomar Machining & Fabricating Inc
Middlebury · 2024
85
1
1
1.2
2.1
Jomar Machining and Fabricating, Inc.
Middlebury · 2022
85
3
2
3.4
2.3
Jomar Machining and Fabricating
Middlebury · 2018
45
3
0
6.5
2.4
Included with any plan: 4 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(m)(5)(iii)
(iii) When the operator of an industrial truck is dismounted and within 25 ft. of the truck still in his view, the load engaging means shall be fully lowered, controls neutralized, and the brakes set to prevent movement.
(b) Protection from fall hazards—(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:
Other all other miscellaneous fabricated metal product manufacturing employers in Indiana
Alert subscribers get notified of each newly cited employer in Indiana the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.