Kalida Manufacturing Inc.: OSHA inspections and violations
Kalida, Ohio · Motor Vehicle Body Manufacturing · NAICS 336211
3inspections
3citation items
$27,306current penalties
Jan 13, 2021last inspection
Since 2002, OSHA inspectors have visited Kalida Manufacturing Inc. in Ohio 3 times.
The most recent inspection opened on Jan 13, 2021 on a referral, in Kalida.
In all, OSHA issued 3 citation items: 3 serious.
The proposed penalties came to $40,959; today they stand at $27,306, 33% less.
The rule cited most here is 1910.147 (lockout/tagout), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Kalida Manufacturing Inc. averages $27,306 across 1 cited inspection.
Kalida Manufacturing Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
265employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Incident on Jan 6, 2021: Employee incurs multiple injuries while assisting with steel
At 10:45 a.m. on January 6, 2021, Employee #1 responded to a request for assistance from a coworker, who was attempting to rewind a steel coil. Employee #1 had been training the coworker on press operations. While the coworker was working the controls to rewind the coil, the steel began "bunching up" because all of the hold-downs, which maintain tension on the coil, were released. Without sufficient tension, the rewind occurred faster than normal, causing the coil to become crooked. Employee #1 began assisting the coworker in straightening the coil at the mandrel but failed to lock out the equipment. While positioned between the coil and the coil blade, Employee #1 manually adjusted the coil. As Employee #1 was holding the loose coil winds in place, he instructed the coworker to operate the coil hold-down arm. However, the coworker mistakenly activated the "coil blade" button instead of the "coil holder" button. The coil blade moved toward the coil, pinning Employee #1 between the coil and the blade. Employee #1 was trapped for approximately five minutes and, upon being released, required CPR. Employee #1 was hospitalized to treat bruising and crushing injuries to the upper chest, lower neck, and side of the face, along with a collapsed lung.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Kalida site logged 5 recordable injuries or illnesses among about 344 workers: 1.4 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Kalida Manufacturing Inc.
Kalida · 2025
344
5
1
1.4
2.7
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Mar 6, 2021, Kalida: Hospitalization · second degree heat (thermal) burns · multiple body parts, n.e.c.
An employee was MIG welding a repair on a bracket. Her shirt caught fire, causing second-degree burns to her stomach, chest, and neck.
Jan 6, 2021, Kalida: Hospitalization · internal injuries to organs and blood vessels of the trunk · chest, except internal location of diseases or disorders
An employee was trying to rewind a coil of steel inside a press machine. The press was actuated, and the employee was pinned between the steel coil and a coil support. The employee suffered a partial collapsed lung.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
29 CFR 1910.147(d)
(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:
Other motor vehicle body manufacturing employers in Ohio
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.