OSHA SearchOSHA records by employer

Kalispell Truss Center, Inc.: OSHA inspections and violations

Kalispell, Montana · Truss Manufacturing · NAICS 321214

2inspections
9citation items
$5,432current penalties
Nov 16, 2021last inspection

Since 2017, OSHA inspectors have visited Kalispell Truss Center, Inc. in Montana 2 times.

The most recent inspection opened on Nov 16, 2021 as a planned inspection, in Kalispell.

In all, OSHA issued 9 citation items: 7 serious and 2 other-than-serious.

The proposed penalties came to $10,865; today they stand at $5,432, 50% less.

The rule cited most here is 1910.213 (woodworking machinery), 5 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Kalispell Truss Center, Inc. averages $5,432 across 1 cited inspection.

Kalispell Truss Center, Inc.: OSHA citation items per year, 2017 to 2021
Citation items per year, by inspection date.

Montana · latest 90 days of OSHA records

29employers cited

Get notified the morning OSHA posts each new citation in Montana: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Montana

Checking a subcontractor, a client or your own company? Watch Kalispell Truss Center, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345639256 OPENED NOV 16, 2021Closed

Planned · No inspection · Safety · 5 employees at the site · Closed Dec 14, 2021

185 Auction Road, Kalispell, MT 59901 · Truss Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 342172665 OPENED MAR 15, 2017Closed

Planned · Complete · Safety · 9 employees at the site · Closed Jun 23, 2017

185 Auction Road, Kalispell, MT 59901 · Truss Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.28(b)(1)(i) · Fall protection in general industry
Serious$2,173$1,086May 30, 2017Final
Citation 1, item 2a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$2,716$1,358May 30, 2017Final
Citation 1, item 2b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$0$0May 30, 2017Final
Citation 1, item 3a
29 CFR 1910.213(h)(1) · Woodworking machinery
Serious$2,716$1,358May 30, 2017Final
Citation 1, item 3b
29 CFR 1910.213(h)(4) · Woodworking machinery
Serious$0$0May 30, 2017Final
Citation 1, item 4
29 CFR 1910.213(s)(6) · Woodworking machinery
Serious$1,630$815May 30, 2017Final
Citation 1, item 5
29 CFR 1910.303(b)(7)(iv) · Electrical equipment, general requirements
Serious$1,630$815May 30, 2017Final
Citation 2, item 1
29 CFR 1910.178(l)(3) · Forklifts and other powered industrial trucks
Other-than-serious$0$0May 30, 2017Final
Citation 2, item 2
29 CFR 1910.303(g)(1)(i) · Electrical equipment, general requirements
Other-than-serious$0$0May 30, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.178(l)(3)

(3) Training program content. Powered industrial truck operators shall receive initial training in the following topics, except in topics which the employer can demonstrate are not applicable to safe operation of the truck in the employer's workplace.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.28 · Fall protection in general industry

29 CFR 1910.303 · Electrical equipment, general requirements

Other truss manufacturing employers in Montana

Alert subscribers get notified of each newly cited employer in Montana the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.