OSHA has inspected KCS International Inc. once in Wisconsin.
The inspection began on May 17, 2017 on a referral, in Oconto.
That inspection ended with 2 citation items: 1 serious and 1 other-than-serious.
Penalties were first proposed at $11,408 and now stand at $5,704, 50% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and KCS International Inc. averages $5,704 (1 cited inspection).
KCS International Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
Incident on May 9, 2017: An employee's finger is amputated by metal sheer
At 10:15 p.m. on May 9, 2017, an employee was operating a metal sheer. The employee attempted to adjust the stock metal material and accidently actuated the foot pedal which cycled the sheer. The employee's right middle finger tip was amputated.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Oconto site logged 15 recordable injuries or illnesses among about 300 workers: 5.8 per 100 full-time workers, against a median of 3.8 for its industry. Those cases cost 4 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Plant 1
Oconto · 2020
300
15
2
5.8
3.8
Plant 2
Oconto · 2020
32
3
0
12.5
3.8
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Feb 6, 2018, Oconto: Hospitalization · fractures · ankle(s)
An employee was walking across a parking lot with his hand tools. The lot had been plowed and salted but patchy snow/ice was present. He slipped on the snow/ice and fell, fracturing his ankle and requiring surgery.
An employee was cutting metal pieces in a shear that is operated with a foot control. While he was leaning forward to adjust a piece with his hand, his foot pushed down on the foot control and activated the shear, which then amputated his right middle fingertip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
29 CFR 1910.303 · Electrical equipment, general requirements
29 CFR 1910.303(b)(2)
(2) Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.