OSHA SearchOSHA records by employer

KDC Management, Inc.: OSHA inspections and violations

Alliance, Ohio · Site Preparation Contractors · NAICS 238910

2inspections
4citation items
$4,387current penalties
Oct 30, 2019last inspection

OSHA has inspected KDC Management, Inc. 2 times in Ohio since 2016.

The latest one began on Oct 30, 2019 on a referral, in Salem.

Those inspections ended with 4 citation items: 4 serious.

Penalties were first proposed at $6,650 and now stand at $4,387, 34% lower after settlements or reviews.

Woodworking machinery comes up most often in these citations: 3 items under 1910.213.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and KDC Management, Inc. averages $2,194 (2 cited inspections).

KDC Management, Inc.: OSHA citation items per year, 2016 to 2019
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

273employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch KDC Management, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344415500 OPENED OCT 30, 2019Closed

Referral · Partial · Safety · 5 employees at the site · Closed May 23, 2022

15292 Salem-alliance Road, Suite 1, Salem, OH 44460 · Nonresidential Property Managers · OSHA's record · Phone and website on Google Maps

Incident on Oct 22, 2019: Employee partially amputates finger while cutting with table

At 1:00 p.m. on October 22, 2019, an employee working as a laborer for a property management company was using a Bosch table saw to cut vinyl flooring. The employee struck his hand against the unguarded sawblade. He partially amputated his pinky finger and required hospitalization.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$3,978$2,784Dec 10, 2019Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$0$0Dec 10, 2019Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$0$0Dec 10, 2019Final

Inspection 341908812 OPENED NOV 15, 2016Closed

Unprogrammed other · Complete · Safety · 5 employees at the site · Closed Aug 25, 2017

2113 Judy Rae Avenue, Alliance, OH 44601 · Site Preparation Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.20(b)(2) · Construction safety programs
Serious$2,672$1,603Nov 15, 2016Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

29 CFR 1926.20 · Construction safety programs

Other site preparation contractors employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.