OSHA SearchOSHA records by employer

Kennan Millworks LLC: OSHA inspections and violations

Kennan, Wisconsin · Sawmills · NAICS 321113

1inspections
4citation items
$3,532current penalties
Dec 28, 2016last inspection

OSHA inspectors have visited Kennan Millworks LLC in Wisconsin one time.

It opened on Dec 28, 2016 after a complaint, in Kennan.

In all, OSHA issued 4 citation items: 4 serious.

The proposed penalties came to $10,865; today they stand at $3,532, 67% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Kennan Millworks LLC averages $3,532 across 1 cited inspection.

Kennan Millworks LLC: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

Wisconsin · latest 90 days of OSHA records

228employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Wisconsin

Checking a subcontractor, a client or your own company? Watch Kennan Millworks LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342095684 OPENED DEC 28, 2016Closed

Complaint · Partial · Safety · 6 employees at the site · Closed Apr 17, 2017

W10338 Main Street County J, Kennan, WI 54537 · Sawmills · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(a)(12) · Woodworking machinery
Serious$3,803$1,902Mar 30, 2017Final
Citation 1, item 1b Serious$0$0Mar 30, 2017Final
Citation 1, item 2a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$3,259$1,630Mar 30, 2017Final
Citation 1, item 2b
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
Serious$3,803$0Mar 30, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(a)(12)

(12) For all circular saws where conditions are such that there is a possibility of contact with the portion of the saw either beneath or behind the table, that portion of the saw shall be covered with an exhaust hood, or, if no exhaust system is required, with a guard that shall be so arranged as to prevent accidental contact with the saw.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.219(f)(3)

(3) Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.

29 CFR 1910.265 · Sawmills

Other sawmills employers in Wisconsin

Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.