Liberty Press LLC has 2 OSHA inspections on record in Utah, the first in 2003.
OSHA's last visit started on Aug 21, 2020 as a planned inspection, in Springville.
Across those inspections OSHA issued 10 citation items: 4 serious and 6 other-than-serious.
OSHA proposed $4,775 in penalties. After settlements and reviews the total is $2,188, down 54%.
Most often, OSHA cited 1910.305, electrical wiring methods (3 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Liberty Press LLC averages $1,688 over 1 cited inspection in that time.
Liberty Press LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Utah · latest 90 days of OSHA records
70employers cited
Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Springville site logged 2 recordable injuries or illnesses among about 108 workers: 1.9 per 100 full-time workers, against a median of 2.0 for its industry. Those cases cost 5 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Liberty Press, LLC
Springville · 2023
108
2
1
1.9
2.0
Included with any plan: 1 more yearly log from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.