Since 2017, OSHA inspectors have visited Lippert Components Manufacturing, Inc. in Alabama 3 times.
The most recent inspection opened on Feb 21, 2024 on a referral, in Double Springs.
In all, OSHA issued 7 citation items: 6 serious and 1 other-than-serious.
The proposed penalties came to $45,548; today they stand at $34,987, 23% less.
The rule cited most here is 1910.147 (lockout/tagout), 5 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Lippert Components Manufacturing, Inc. averages $11,662 across 3 cited inspections.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
99employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Lippert Components Manufacturing, Inc. and get notified the morning OSHA posts a new citation for it.
OSHA records show Lippert Components Manufacturing, Inc. at 3 sites in 3 states. Together they've had 5 inspections and $59,048 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 3 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on May 4, 2021: Employee breaks finger when caught in cleaning machine clamp
At 2:48 p.m. on May 4, 2021, an employee working as a machine operator for a plastic products manufacturer was operating a Sampson Corner Cleaner Machine. The employee placed her right hand inside the clamp pressing area when the mechanism activated. The employee was hospitalized to treat a broken ring finger.
An employee was making repairs to rollers where adhesive is applied and heated. The employee was investigating why glue was getting on glass material coming through the rollers when a glass pane contacted his left hand, causing fractures in the hand. The machine was not guarded at the time of the incident.
May 4, 2021, Double Springs: Hospitalization · fractures · hand(s) and finger(s)
An employee was using a corner cleaner machine to cut excess vinyl material off the finished window frame and caught her hand under the clamp mechanism. The clamp pinched her hand against the window frame resulting in fractures to the hand and/or fingers.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(5)(i)
(5) Protective materials and hardware. (i) Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources.
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.