OSHA SearchOSHA records by employer

Livello, LLC.: OSHA inspections and violations

Sanford, Florida · Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers · NAICS 423310

1inspections
3citation items
$5,456current penalties
Mar 22, 2019last inspection

Livello, LLC. has one OSHA inspection on record in Florida.

OSHA opened it on Mar 22, 2019 on a referral, in Sanford.

From that inspection OSHA issued 3 citation items: 2 serious and 1 other-than-serious.

OSHA proposed $9,093 in penalties. After settlements and reviews the total is $5,456, down 40%.

Most often, OSHA cited 1910.213, woodworking machinery (2 items).

For context, across all wholesale employers the median penalty per cited inspection since 2015 is $3,425. Livello, LLC. averages $5,456 over 1 cited inspection in that time.

It reported 1 severe injury to OSHA since 2015.

Livello, LLC.: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Want to know if OSHA cites Livello, LLC. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 343871497 OPENED MAR 22, 2019Closed

Referral · Partial · Safety · 16 employees at the site · Closed Sep 10, 2019

3800 Enterprise Way. Suite 1140, Sanford, FL 32771 · Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

Incident on Feb 19, 2019: Employee suffers amputation of two fingers while using table

At 10:00 a.m. on February 19, 2019, Employee # 1 was resawing a 42 inch length piece of poplar wood using a table saw with a 14 inch rip saw blade. The saw blade kicked back. The employee was hospitalized and suffered an amputation of the middle and ring fingers of left hand.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(2) · Woodworking machinery
 Serious$5,304$3,182Jul 25, 2019Final
Citation 1, item 1b
29 CFR 1910.213(c)(3) · Woodworking machinery
 Serious$0$0Jul 25, 2019Final
Citation 2, item 1
29 CFR 1904.39(a)(2) · Reporting deaths and severe injuries
 Other-than-serious$3,789$2,273Jul 25, 2019Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Feb 19, 2019, Sanford: Hospitalization, amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was cutting a piece of wood on a table saw when the wood jumped back, dragging his left hand into the blade and amputating his ring and middle fingers.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.39 · Reporting deaths and severe injuries

29 CFR 1904.39(a)(2)

(2) Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

Other lumber, plywood, millwork, and wood panel merchant wholesalers employers in Florida

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.