Lund Manufacturing: OSHA inspections and violations
Farley, Iowa · Nonferrous Metal Foundries · NAICS 331521
6inspections
10citation items
$20,250current penalties
May 27, 2025last inspection
Lund Manufacturing has 6 OSHA inspections on record in Iowa, the first in 1999.
OSHA's last visit started on May 27, 2025 on a referral, in Farley.
Across those inspections OSHA issued 10 citation items: 3 serious and 7 other-than-serious.
OSHA proposed $29,235 in penalties. After settlements and reviews the total is $20,250, down 31%.
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Lund Manufacturing averages $9,500 over 2 cited inspections in that time.
Lund Manufacturing also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Iowa · latest 90 days of OSHA records
69employers cited
Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.
Incident on May 5, 2008: Employee amputates fingers in press slide
An employee was having problems with a die-cast press. The slide was filling up with metal, preventing the slide from returning to its original position. A seco nd employee assisted the first employee in attempting to fix the problem. The se cond employee wiped the cylinder with the fingers of his right hand, and the fir st employee pushed the core button, which activated the slide. The slide caught the second employee's fingers. The injured employee suffered amputations of the tip of his index finger and the end of his middle finger to the first knuckle.
Incident on Sep 21, 1999: Employee's fingers amputated in hydraulic press
Employee #1 was using a hydraulic trim machine when it cycled without warning. T wo fingers on her right hand became caught in the point of operation and were am putated. The cause of the accident was defective return springs on the dual oper ating levers.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Farley site logged 8 recordable injuries or illnesses among about 41 workers: 13.2 per 100 full-time workers, against a median of 5.4 for its industry. Those cases cost 5 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Lund Manufacturing Inc.
Farley · 2022
41
8
1
13.2
5.4
Lund Manufacturing
Farley · 2018
63
3
0
4.6
5.4
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(b) Implementation—(1) What do I need to do to complete the OSHA 300 Log? You must enter information about your business at the top of the OSHA 300 Log, enter a one or two line description for each recordable injury or illness, and summarize this information on the OSHA 300-A at the end of the year.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.