Manna Pro Products LLC: OSHA inspections and violations
Kansas City, Kansas · Other Animal Food Manufacturing · NAICS 311119
4inspections
10citation items
$13,402current penalties
Feb 21, 2019last inspection
Since 2007, OSHA inspectors have visited Manna Pro Products LLC in Kansas 4 times.
The most recent inspection opened on Feb 21, 2019 on a referral, in Kansas City.
In all, OSHA issued 10 citation items: 4 serious and 6 other-than-serious.
The proposed penalties came to $18,780; today they stand at $13,402, 29% less.
The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 4 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Manna Pro Products LLC averages $3,963 across 3 cited inspections.
Manna Pro Products LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Kansas · latest 90 days of OSHA records
48employers cited
Get notified the morning OSHA posts each new citation in Kansas: the employer, the site address, the rules broken and the penalty.
OSHA records show Manna Pro Products LLC at 2 sites in 2 states. Together they've had 5 inspections and $18,945 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Feb 12, 2019: Employee amputates finger when caught in pulley
At 8:00 a.m. on February 12, 2019, an employee was evaluating a pulley with his hand after removing the guard when the motor started up and caught his finger, amputating it. The employee was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Kansas City site logged 0 recordable injuries or illnesses among about 42 workers: 0.0 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Manna Pro Products Kansas City
Kansas City · 2023
42
0
0
0.0
2.6
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Feb 12, 2019, Kansas City: Amputation · amputations · fingertip(s)
A maintenance employee was removing a guard to check a pulley size on a drive when the motor came on and the guard caught on the pulley. The pulley spun and hit the tip of his right middle finger resulting in amputation of the fingertip and nail.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(c)(2)(i)
(2) Guarding horizontal shafting. (i) All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires.
Alert subscribers get notified of each newly cited employer in Kansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.