OSHA SearchOSHA records by employer

Marigold Works, LLC: OSHA inspections and violations

Jasper, Alabama · Machine Shops · NAICS 332710

1inspections
3citation items
$7,172current penalties
Jan 13, 2023last inspection

OSHA inspectors have visited Marigold Works, LLC in Alabama one time.

It opened on Jan 13, 2023 as a planned inspection, in Jasper.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $11,954; today they stand at $7,172, 40% less.

The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Marigold Works, LLC averages $7,172 across 1 cited inspection.

Marigold Works, LLC: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Alabama · latest 90 days of OSHA records

99employers cited

Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Alabama

Checking a subcontractor, a client or your own company? Watch Marigold Works, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346438096 OPENED JAN 13, 2023Closed

Planned · Complete · Safety · 24 employees at the site · Closed May 19, 2023

200 18th Avenue Southwest, Jasper, AL 35501 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.179(j)(3) · Overhead and gantry cranes
Serious$6,641$3,985May 1, 2023Final
Citation 1, item 2a
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$5,313$3,188May 1, 2023Final
Citation 1, item 2b
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$0$0May 1, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.179 · Overhead and gantry cranes

29 CFR 1910.179(j)(3)

(3) Periodic inspection. Complete inspections of the crane shall be performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section, depending upon its activity, severity of service, and environment, or as specifically indicated below. These inspections shall include the requirements of paragraph (j)(2) of this section and in addition, the following items. Any deficiencies such as listed shall be carefully examined and determination made as to whether they constitute a safety hazard:

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

Other machine shops employers in Alabama

Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.