OSHA SearchOSHA records by employer

Martin Soto: OSHA inspections and violations

Midlothian, Texas · Masonry Contractors · NAICS 238140

1inspections
5citation items
$12,725current penalties
Jul 6, 2023last inspection

Martin Soto has one OSHA inspection on record in Texas.

OSHA opened it on Jul 6, 2023 as a planned inspection, in Midlothian.

From that inspection OSHA issued 5 citation items: 5 serious.

OSHA proposed $12,725 in penalties and the amount has not been reduced.

Most often, OSHA cited 1926.1153, silica dust in construction (2 items).

For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. Martin Soto averages $12,725 over 1 cited inspection in that time.

Martin Soto: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

394employers cited

13 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Martin Soto and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346979057 OPENED JUL 6, 2023Closed

Planned · Partial · Health · 3 employees at the site · Closed Mar 20, 2026

2477 Pebblebank Lane, Midlothian, TX 76065 · Masonry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
Serious$2,679$2,679Sep 22, 2023Final
Citation 1, item 2
29 CFR 1910.134(a)(2) · Respiratory protection
Serious$2,679$2,679Sep 22, 2023Final
Citation 1, item 3
29 CFR 1926.300(b)(1) · Tools—Hand and Power: general requirements
Serious$4,688$4,688Sep 22, 2023Final
Citation 1, item 4a
29 CFR 1926.1153(c)(1) · Silica dust in construction
Serious$2,679$2,679Sep 22, 2023Final
Citation 1, item 4b
29 CFR 1926.1153(d)(2)(i) · Silica dust in construction
Serious$0$0Sep 22, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.134(a)(2)

(2) The CNP system defaults selected for test pressure shall be set at −15 mm of water (-0.58 inches of water) and the modeled inspiratory flow rate shall be 53.8 liters per minute for performing fit tests.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.1153 · Silica dust in construction

29 CFR 1926.1153(c)(1)

(c) Specified exposure control methods. (1) For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.

29 CFR 1926.300 · Tools—Hand and Power: general requirements

Other masonry contractors employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.