Anniston, Alabama · Other Metal Container Manufacturing · NAICS 332439
2inspections
4citation items
$14,385current penalties
Apr 6, 2023last inspection
Since 2006, OSHA inspectors have visited Mauser USA, LLC in Alabama 2 times.
The most recent inspection opened on Apr 6, 2023 on a referral, in Anniston.
In all, OSHA issued 4 citation items: 4 serious.
The proposed penalties came to $16,260; today they stand at $14,385, 12% less.
The rule cited most here is 1910.212 (machine guarding), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Mauser USA, LLC averages $11,385 across 1 cited inspection.
Mauser USA, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
100employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
OSHA records show Mauser USA, LLC at 6 sites in 5 states. Together they've had 13 inspections and $96,185 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 6 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the Anniston site logged 0 recordable injuries or illnesses among about 33 workers: 0.0 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Mauser USA LLC
Anniston · 2017
33
0
0
0.0
2.6
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Mar 29, 2023, Anniston: Hospitalization · fractures · toes(s), toenail(s)
An employee was staging metal pallet pans on a hydraulic lift table when assembling cages. The hydraulic lift table experienced a mechanical failure and lowered down onto the employee's right foot, resulting in two fractured toes and a laceration.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
(b) Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.
Other other metal container manufacturing employers in Alabama
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.