McGill Airflow, LLC: OSHA inspections and violations
Hillsboro, Texas · Sheet Metal Work Manufacturing · NAICS 332322
3inspections
9citation items
$6,622current penalties
Apr 22, 2019last inspection
OSHA has inspected McGill Airflow, LLC 3 times in Texas since 2005.
The latest one began on Apr 22, 2019 on a referral, in Hillsboro.
Those inspections ended with 9 citation items: 6 serious and 3 other-than-serious.
Penalties were first proposed at $11,037 and now stand at $6,622, 40% lower after settlements or reviews.
Exit routes comes up most often in these citations: 2 items under 1910.37.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and McGill Airflow, LLC averages $3,109 (2 cited inspections).
McGill Airflow, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
393employers cited
4 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Apr 15, 2019: Employee amputates fingertip when pulled into machine nip po
At 10:00 a.m. on April 15, 2019, an employee was operating a beading machine when his glove was caught and pulled his middle finger into the machine, amputating his fingertip. The employee was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Hillsboro site logged 1 recordable injury or illness among about 20 workers: 6.2 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
McGill AirFlow TX Plant
Hillsboro · 2021
20
1
1
6.2
3.6
Included with any plan: 2 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was operating a beading machine. The machine caught his left glove, causing the amputation of his middle fingertip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)(i)
(i) Select, and have each affected employee use, the types of PPE that will protect the affected employee from the hazards identified in the hazard assessment;
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.