Sterling, Illinois · Other Engine Equipment Manufacturing · NAICS 333618
5inspections
21citation items
$30,475current penalties
Dec 3, 2025last inspection
Menk USA, LLC has 5 OSHA inspections on record in Illinois, the first in 2003.
OSHA's last visit started on Dec 3, 2025 on a referral, in Sterling.
Across those inspections OSHA issued 21 citation items: 18 serious and 3 other-than-serious.
OSHA proposed $40,228 in penalties. After settlements and reviews the total is $30,475, down 24%.
Most often, OSHA cited 1910.217, mechanical power presses (6 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Menk USA, LLC averages $13,000 over 2 cited inspections in that time.
Menk USA, LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
423employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
29 CFR 1910.125(e)(1)(i) · Additional requirements for dipping and coating operations that use flammable liquids or liquids with flashpoints greater than 199.4 °F (93 °C)
Serious
$1,050
$500
Jun 30, 2003
Closed
Citation 1, item 3b
29 CFR 1910.125(e)(1)(ii) · Additional requirements for dipping and coating operations that use flammable liquids or liquids with flashpoints greater than 199.4 °F (93 °C)
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Sterling site logged 6 recordable injuries or illnesses among about 83 workers: 7.2 per 100 full-time workers, against a median of 1.4 for its industry. Those cases cost 128 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Menk USA, LLC
Sterling · 2025
83
6
5
7.2
1.4
Included with any plan: 5 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Nov 18, 2025, Sterling: Amputation · avulsions, enucleations without bone loss · finger or thumb tip(s), nail(s)
An employee was checking a shock absorber air cylinder on a plasma welding station to see if it needed replacing. The cylinder pinched his left index finger, resulting in a partial amputation of flesh on the fingertip that required hospitalization.
Sep 5, 2025, Sterling: Hospitalization · severe wounds or internal injuries and soft tissue injuries · trunk and other upper extremities
An employee was removing product (a transformer radiator weighing approximately 2,640 pounds) from the paint room utilizing an overhead drop-crane system. The employee inspected the product in the drop section and started to lower the load. The product fell out of the rigging and hit the ground. It then tipped, pinning the employee against a desk. The employee was hospitalized with collapsed…
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Design and construction of inside storage rooms—(i) Construction. Inside storage rooms shall be constructed to meet the required fire-resistive rating for their use. Such construction shall comply with the test specifications set forth in Standard Methods of Fire Tests of Building Construction and Materials, NFPA 251-1969. Where an automatic sprinkler system is provided, the system shall be designed and installed in an acceptable manner. Openings to other rooms or buildings shall be provided with noncombustible liquid-tight raised sills or ramps at least 4 inches in height, or the floor in the storage area shall be at least 4 inches below the surrounding floor. Openings shall be provided with approved self-closing fire doors. The room shall be liquid-tight where the walls join the floor. A permissible alternate to the sill or ramp is an open-grated trench inside of the room which dra
29 CFR 1910.106(d)(4)(iv)
(iv) Ventilation. Every inside storage room shall be provided with either a gravity or a mechanical exhaust ventilation system. Such system shall be designed to provide for a complete change of air within the room at least six times per hour. If a mechanical exhaust system is used, it shall be controlled by a switch located outside of the door. The ventilating equipment and any lighting fixtures shall be operated by the same switch. A pilot light shall be installed adjacent to the switch if Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), are dispensed within the room. Where gravity ventilation is provided, the fresh air intake, as well as the exhaust outlet from the room, shall be on the exterior of the building in which the room is located.
29 CFR 1910.106(d)(4)(v)
(v) Storage in inside storage rooms. In every inside storage room there shall be maintained one clear aisle at least 3 feet wide. Containers over 30 gallons capacity shall not be stacked one upon the other. Dispensing shall be by approved pump or self-closing faucet only.
29 CFR 1910.125 · Additional requirements for dipping and coating operations that use flammable liquids or liquids with flashpoints greater than 199.4 °F (93 °C)
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.