Timken Drives LLC has 3 OSHA inspections on record in Illinois, the first in 2018.
OSHA's last visit started on Jul 31, 2024 after a complaint, in Fulton.
Across those inspections OSHA issued 3 citation items: 2 serious and 1 other-than-serious.
OSHA proposed $29,453 in penalties. After settlements and reviews the total is $20,680, down 30%.
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Timken Drives LLC averages $10,340 over 2 cited inspections in that time.
Timken Drives LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
420employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
OSHA records show Timken Drives LLC at 2 sites in 2 states. Together they've had 4 inspections and $24,180 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Fulton site logged 18 recordable injuries or illnesses among about 481 workers: 3.8 per 100 full-time workers, against a median of 2.1 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Fulton site
Fulton · 2022
481
18
1
3.8
2.1
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Feb 7, 2024, Fulton: Hospitalization · fractures · skull
An employee was pulling a pallet jack backward when she lost her balance and fell backward, striking her head on the floor and suffering a fracture at the base of the skull.
Mar 17, 2023, Fulton: Amputation · amputations · fingertip(s)
An employee was aligning two components of an assembly machine when their left index fingertip was amputated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:
(iii) Protection from arc welding rays. Where the work permits, the welder should be enclosed in an individual booth painted with a finish of low reflectivity such as zinc oxide (an important factor for absorbing ultraviolet radiations) and lamp black, or shall be enclosed with noncombustible screens similarly painted. Booths and screens shall permit circulation of air at floor level. Workers or other persons adjacent to the welding areas shall be protected from the rays by noncombustible or flameproof screens or shields or shall be required to wear appropriate goggles.
Other mechanical power transmission equipment manufacturing employers in Illinois
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.