Midwest Industries Inc.: OSHA inspections and violations
Ida Grove, Iowa · Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing · NAICS 333924
17inspections
46citation items
$22,148current penalties
Oct 26, 2021last inspection
OSHA has inspected Midwest Industries Inc. 17 times in Iowa since 1973.
The latest one began on Oct 26, 2021 on a referral, in Ida Grove.
Those inspections ended with 46 citation items: 20 serious and 26 other-than-serious.
Penalties were first proposed at $31,582 and now stand at $22,148, 30% lower after settlements or reviews.
Respiratory protection comes up most often in these citations: 7 items under 1910.134.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Midwest Industries Inc. averages $4,200 (1 cited inspection).
1 inspection on this page followed a fatal incident.
Midwest Industries Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Iowa · latest 90 days of OSHA records
66employers cited
Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.
Incident on Oct 21, 2021: Employee's finger is amputated on belt and pulley
At 5:00 p.m. on October 21, 2021, an employee and his coworkers had replaced a pulley on the Gema Vertical Axis ZA07. The employee was watching the machine run, making sure the belt was centered on the bottom pulley. The employee noticed powder build up on the pulley preventing the belt from belt from sitting properly on the pulley. While the machine was running the employee attempted to move the belt to center it on the pulley and got his finger caught in between the belt and pulley. The employee suffered a right middle fingertip amputation to first knuckle and was treated without hospitalization.
Incident on Jun 30, 2011: Employee's finger amputated in cut of saw
At approximately 8:30 a.m. on June 30, 2011, Employee #1 was working on a cut of f machine. He was making fittings out of a 1.25-in. pipe and the end of the pipe had to be cut off. The pipe was fed through the machine and it came out too far . With his left hand he pushed the feed handle to the left instead of the right which did not shut off the feeder. He reached to push the pipe back with his han d instead of using the pliers and pinched his right middle finger between the pi pe and the stopper. Employee #1's finger was amputated and he was hospitalized.
Incident on Apr 29, 2004: Employee amputates finger in bandsaw
On May 25, 2004, an employee was operating a metal cutting bandsaw to cut a sing le piece of aluminum. The employee reached with his right hand to shut off the m achine while using his left hand to move the stock. The employee placed his left hand under the moving blade cutting off his left small finger.
No citations from this inspection.
Inspection 115052599 OPENED NOV 4, 1992Closed
Unprogrammed related · Partial · Safety · 240 employees at the site · Closed Aug 27, 1993
Incident on Dec 4, 1991: Employee's finger amputated in metal tube roller
Employee #1 was feeding a metal tube roller when his glove caught in the machine ry and his hand was pulled in. The machine amputated one of the employee's finge rs.
Incident on May 22, 1990 (fatal): Employee killed when struck by overturned lawn mower
Employee #1 was operating a Scag commercial lawn mower. The mower flipped over o n top of him and he died of mechanical asphyxiation. The mower was not engineere d with overhead protection or roll bar protection. Employee #1 had to be cut out of his seat belt.
Incident on May 22, 1990: Employee's finger amputated in press
Employee #1 was operating a full revolution mechanical power press that was not equipped with point of operation guarding. He was using stops to tell when to qu it feeding strips. His hand was on the other side of the strip, hidden from his view. Employee #1 activated the foot pedal, amputating the third finger on his r ight hand.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Ida Grove site logged 23 recordable injuries or illnesses among about 278 workers: 8.3 per 100 full-time workers, against a median of 5.2 for its industry. Those cases cost 100 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Midwest Industries, Inc.
Ida Grove · 2025
278
23
2
8.3
5.2
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(8) Sources of ignition. In addition to the previous restrictions of this paragraph, the following shall apply: There shall be no smoking or open flames in the areas used for fueling, servicing fuel systems for internal combustion engines, receiving or dispensing of flammable liquids. Conspicuous and legible signs prohibiting smoking shall be posted within sight of the customer being served. The motors of all equipment being fueled shall be shut off during the fueling operation.
(a) General requirements. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.
(2) The CNP system defaults selected for test pressure shall be set at −15 mm of water (-0.58 inches of water) and the modeled inspiratory flow rate shall be 53.8 liters per minute for performing fit tests.
Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.