Millard Lumber, Inc: OSHA inspections and violations
Spring Hill, Kansas · Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers · NAICS 423310
1inspections
5citation items
$12,070current penalties
Mar 10, 2015last inspection
OSHA inspectors have visited Millard Lumber, Inc in Kansas one time.
It opened on Mar 10, 2015 on a referral, in Spring Hill.
In all, OSHA issued 5 citation items: 2 serious and 3 other-than-serious.
The proposed penalties came to $18,700; today they stand at $12,070, 35% less.
The rule cited most here is 1910.147 (lockout/tagout), 2 times.
Among wholesale employers, the typical cited inspection since 2015 ends with a $3,425 penalty. Millard Lumber, Inc averages $12,070 across 1 cited inspection.
Millard Lumber, Inc also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Kansas · latest 90 days of OSHA records
43employers cited
Get notified the morning OSHA posts each new citation in Kansas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the Spring Hill site logged 2 recordable injuries or illnesses among about 21 workers: 9.4 per 100 full-time workers, against a median of 3.9 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Spring Hill site
Spring Hill · 2017
21
2
0
9.4
3.9
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Mar 2, 2015, Spring Hill: Amputation · amputations · finger(s), fingernail(s), n.e.c.
An employee's finger was amputated when a piece of unsecured plywood slid off of a forklift and smashed the left-hand pinky finger between two plywood stacks.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)
(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.303 · Electrical equipment, general requirements
Other lumber, plywood, millwork, and wood panel merchant wholesalers employers in Kansas
Alert subscribers get notified of each newly cited employer in Kansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.