OSHA SearchOSHA records by employer

Misael Hernandez: OSHA inspections and violations

Orange Beach, Alabama · Framing Contractors · NAICS 238130

1inspections
3citation items
$5,683current penalties
Feb 12, 2019last inspection

OSHA inspectors have visited Misael Hernandez in Alabama one time.

It opened on Feb 12, 2019 as a planned inspection, in Orange Beach.

In all, OSHA issued 3 citation items: 3 serious.

The penalties, $5,683 in total, stand where OSHA first set them.

The rule cited most here is 1926.451 (scaffolds, general requirements), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Misael Hernandez averages $5,683 across 1 cited inspection.

Misael Hernandez: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Alabama · latest 90 days of OSHA records

100employers cited

28 of them in the same industry

Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Alabama

Checking a subcontractor, a client or your own company? Watch Misael Hernandez and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343777454 OPENED FEB 12, 2019Closed

Planned · Partial · Safety · 4 employees at the site · Closed Nov 30, 2022

5525 Bear Point Ave., Orange Beach, AL 36561 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.266(d)(1)(iv) · Logging operations
Serious$2,273$2,273Feb 19, 2019Final
Citation 1, item 2a
29 CFR 1926.451(b)(2) · Scaffolds, general requirements
Serious$3,410$3,410Feb 19, 2019Final
Citation 1, item 2b
29 CFR 1926.451(g)(1) · Scaffolds, general requirements
Serious$0$0Feb 19, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.266 · Logging operations

29 CFR 1910.266(d)(1)(iv)

(iv) The employer shall provide, at no cost to the employee, and assure that each employee who operates a chain saw wears leg protection constructed with cut-resistant material, such as ballistic nylon. The leg protection shall cover the full length of the thigh to the top of the boot on each leg to protect against contact with a moving chain saw. Exception: This requirement does not apply when an employee is working as a climber if the employer demonstrates that a greater hazard is posed by wearing leg protection in the particular situation, or when an employee is working from a vehicular mounted elevating and rotating work platform meeting the requirements of 29 CFR 1910.67.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(b)(2)

(2) Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and walkway shall be at least 18 inches (46 cm) wide.

29 CFR 1926.451(g)(1)

(g) Fall protection. (1) Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1) (i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold. Paragraph (g)(2) of this section addresses fall protection for scaffold erectors and dismantlers.

Other framing contractors employers in Alabama

Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.