OSHA SearchOSHA records by employer

Modutek International, LLC: OSHA inspections and violations

Soperton, Georgia · Motor and Generator Manufacturing · NAICS 335312

1inspections
6citation items
$7,150current penalties
Jul 23, 2025last inspection

OSHA inspectors have visited Modutek International, LLC in Georgia one time.

It opened on Jul 23, 2025 after a complaint, in Soperton.

In all, OSHA issued 6 citation items: 5 serious and 1 other-than-serious.

The proposed penalties came to $11,916; today they stand at $7,150, 40% less.

The rule cited most here is 1910.134 (respiratory protection), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Modutek International, LLC averages $7,150 across 1 cited inspection.

Modutek International, LLC also files yearly injury logs with OSHA, summarized below.

Modutek International, LLC: OSHA citation items per year, 2025 to 2025
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

147employers cited

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch Modutek International, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348395971 OPENED JUL 23, 2025Closed

Complaint · Partial · Health · 126 employees at the site · Closed Dec 15, 2025

394 Park View Drive, Soperton, GA 30457 · Motor and Generator Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.107(b)(5)(i) · Spray painting and finishing
Serious$5,107$3,064Aug 29, 2025Final
Citation 1, item 1b
29 CFR 1910.107(b)(9) · Spray painting and finishing
Serious$0$0Aug 29, 2025Final
Citation 1, item 2a
29 CFR 1910.134(e)(1) · Respiratory protection
Serious$5,107$3,064Aug 29, 2025Final
Citation 1, item 2b
29 CFR 1910.134(f)(2) · Respiratory protection
Serious$0$0Aug 29, 2025Final
Citation 1, item 2c
29 CFR 1910.134(g)(1)(i)(a) · Respiratory protection
Serious$0$0Aug 29, 2025Final
Citation 2, item 1
29 CFR 1904.41(a)(1)(i) · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA
Other-than-serious$1,702$1,021Aug 29, 2025Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2024, the Soperton site logged 2 recordable injuries or illnesses among about 119 workers: 2.0 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 3 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Modutek International LLC
Soperton · 2024
119 222.03.6

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.41 · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA

29 CFR 1904.41(a)(1)(i)

(a) Basic requirements—(1) Annual electronic submission of information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses. (i) If your establishment had 20-249 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form.

29 CFR 1910.107 · Spray painting and finishing

29 CFR 1910.107(b)(5)(i)

(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.

29 CFR 1910.107(b)(9)

(9) Cleaning. Spray booths shall be so installed that all portions are readily accessible for cleaning. A clear space of not less than 3 feet on all sides shall be kept free from storage or combustible construction.

29 CFR 1910.134 · Respiratory protection

Other motor and generator manufacturing employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.