Morgan Industrial Inc: OSHA inspections and violations
North Plains, Oregon · Other Building Equipment Contractors · NAICS 238290
10inspections
14citation items
$1,485current penalties
Nov 30, 2017last inspection
Since 1993, OSHA inspectors have visited Morgan Industrial Inc in Oregon 10 times.
The most recent inspection opened on Nov 30, 2017 after a complaint, in Hillsboro.
In all, OSHA issued 14 citation items: 5 serious and 9 other-than-serious.
The penalties, $1,485 in total, stand where OSHA first set them.
The rule cited most here is 7010.7650 (), 2 times.
Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Morgan Industrial Inc averages $180 across 2 cited inspections.
Morgan Industrial Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Oregon · latest 90 days of OSHA records
391employers cited
Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Hillsboro site logged 2 recordable injuries or illnesses among about 134 workers: 1.6 per 100 full-time workers, against a median of 0.6 for its industry. Those cases cost 40 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Morgan Industrial
Hillsboro · 2021
134
2
1
1.6
0.6
Morgan Industrial, Inc.
Hillsboro · 2020
120
1
0
0.8
1.8
Included with any plan: 1 more yearly log from these sites, back to 2019, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(3) Gages and valves. (i) Every air receiver shall be equipped with an indicating pressure gage (so located as to be readily visible) and with one or more spring-loaded safety valves. The total relieving capacity of such safety valves shall be such as to prevent pressure in the receiver from exceeding the maximum allowable working pressure of the receiver by more than 10 percent.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(l)(4)(iii)
(iii) An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.