MR Stratford Baling, LLC: OSHA inspections and violations
Stratford, Connecticut · Recyclable Material Merchant Wholesalers · NAICS 423930
1inspections
4citation items
$7,000current penalties
Apr 28, 2016last inspection
OSHA inspectors have visited MR Stratford Baling, LLC in Connecticut one time.
It opened on Apr 28, 2016 on a referral, in Stratford.
In all, OSHA issued 4 citation items: 1 serious and 3 other-than-serious.
The proposed penalties came to $10,000; today they stand at $7,000, 30% less.
The rule cited most here is 1910.147 (lockout/tagout), 2 times.
Among wholesale employers, the typical cited inspection since 2015 ends with a $3,423 penalty. MR Stratford Baling, LLC averages $7,000 across 1 cited inspection.
MR Stratford Baling, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Connecticut · latest 90 days of OSHA records
88employers cited
Get notified the morning OSHA posts each new citation in Connecticut: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2016, the Stratford site logged 2 recordable injuries or illnesses among about 27 workers: 6.7 per 100 full-time workers, against a median of 1.0 for its industry. Those cases cost 47 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
MR - Stratford Baling LLC.
Stratford · 2016
27
2
1
6.7
1.0
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
An employee was clearing a jam on a machine using a hammer. As he used the hammer to hit the material, his hand struck a metal bar, amputating his right ring finger at the third knuckle.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)
(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
Alert subscribers get notified of each newly cited employer in Connecticut the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.