OSHA SearchOSHA records by employer

NC Glazing - Fabrication, LLC: OSHA inspections and violations

Four Oaks, North Carolina · Metal Window and Door Manufacturing · NAICS 332321

1inspections
3citation items
$2,000current penalties
Mar 6, 2025last inspection

OSHA inspectors have visited NC Glazing - Fabrication, LLC in North Carolina one time.

It opened on Mar 6, 2025 as a planned inspection, in Four Oaks.

In all, OSHA issued 3 citation items: 3 serious.

The penalties, $2,000 in total, stand where OSHA first set them.

The rule cited most here is 1910.147 (lockout/tagout), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. NC Glazing - Fabrication, LLC averages $2,000 across 1 cited inspection.

NC Glazing - Fabrication, LLC: OSHA citation items per year, 2025 to 2025
Citation items per year, by inspection date.

North Carolina · latest 90 days of OSHA records

228employers cited

Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in North Carolina

Checking a subcontractor, a client or your own company? Watch NC Glazing - Fabrication, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348087305 OPENED MAR 6, 2025Closed

Planned · Partial · Health · 18 employees at the site · Closed Apr 3, 2025

10764 Nc Hwy210, Four Oaks, NC 27524 · Metal Window and Door Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$1,000$1,000Mar 18, 2025Final
Citation 1, item 1b
29 CFR 1910.147(c)(7)(i)(a) · Lockout/tagout
Serious$0$0Mar 18, 2025Final
Citation 1, item 2
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$1,000$1,000Mar 18, 2025Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(7)(i)(a)

(A) Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

Other metal window and door manufacturing employers in North Carolina

Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.