Omaha, Nebraska · Sheet Metal Work Manufacturing · NAICS 332322
1inspections
4citation items
$15,580current penalties
Aug 30, 2016last inspection
Nci Group Inc. has one OSHA inspection on record in Nebraska.
OSHA opened it on Aug 30, 2016 on a referral, in Omaha.
From that inspection OSHA issued 4 citation items: 3 serious and 1 other-than-serious.
OSHA proposed $30,601 in penalties. After settlements and reviews the total is $15,580, down 49%.
Most often, OSHA cited 1910.219, belts, pulleys and power-transmission parts (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Nci Group Inc. averages $15,580 over 1 cited inspection in that time.
Nci Group Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Nebraska · latest 90 days of OSHA records
31employers cited
Get notified the morning OSHA posts each new citation in Nebraska: the employer, the site address, the rules broken and the penalty.
OSHA records show Nci Group Inc. at 14 sites in 10 states. Together they've had 27 inspections and $125,772 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 14 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the Omaha site logged 0 recordable injuries or illnesses among about 8 workers: 0.0 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
MB-Omaha
Omaha · 2017
8
0
0
0.0
3.6
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee reached onto the top of a piece of equipment to get a tape measure and his thumb was caught in a pinch point resulting in amputation of the thumb between the knuckle and finger nail.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
29 CFR 1910.219(e)(3)(i)
(3) Vertical and inclined belts. (i) Vertical and inclined belts shall be enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section.
29 CFR 1910.303 · Electrical equipment, general requirements
Other sheet metal work manufacturing employers in Nebraska
Alert subscribers get notified of each newly cited employer in Nebraska the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.