Britton, South Dakota · Prefabricated Wood Building Manufacturing · NAICS 321992
Since 2022, OSHA inspectors have visited Nexgen US LBM in South Dakota 2 times.
The most recent inspection opened on Feb 26, 2026 as a planned inspection, in Britton.
In all, OSHA issued 3 citation items: 3 other-than-serious.
The proposed penalties came to $6,340; today they stand at $4,438, 30% less.
The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Nexgen US LBM averages $2,219 across 2 cited inspections.
Want to know if OSHA cites Nexgen US LBM again? Add it to a watchlist and we will email you the morning the citation shows up.
Watch this company10954 424th Avenue, Britton, SD 57430 · Truss Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1a 29 CFR 1910.215(a)(4) · Grinders and abrasive wheels |
Other-than-serious | $0 | $0 | Apr 23, 2026 | Final |
| Citation 1, item 1b 29 CFR 1910.215(b)(9) · Grinders and abrasive wheels |
Other-than-serious | $0 | $0 | Apr 23, 2026 | Final |
102 Vander Horck Street, Britton, SD 57430 · Prefabricated Wood Building Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts |
Other-than-serious | $6,340 | $4,438 | Oct 21, 2022 | Final |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.215(a)(4)
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
29 CFR 1910.219(f)(3)
(3) Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.