OSHA SearchOSHA records by employer

Normandie 1901, LLC: OSHA inspections and violations

Saint Louis, Missouri · All Other Amusement and Recreation Industries · NAICS 713990

1inspections
7citation items
$9,000current penalties
Jul 23, 2019last inspection

OSHA has inspected Normandie 1901, LLC once in Missouri.

The inspection began on Jul 23, 2019 after a fatality or catastrophe, in Saint Louis.

That inspection ended with 7 citation items: 7 serious.

Penalties were first proposed at $26,522 and now stand at $9,000, 66% lower after settlements or reviews.

Electrical wiring methods comes up most often in these citations: 2 items under 1910.305.

How that compares: the median penalty per cited inspection for arts and recreation employers since 2015 is $1,398, and Normandie 1901, LLC averages $9,000 (1 cited inspection).

1 inspection on this page followed a fatal incident.

Normandie 1901, LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Missouri · latest 90 days of OSHA records

121employers cited

Get notified the morning OSHA posts each new citation in Missouri: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Missouri

Checking a subcontractor, a client or your own company? Watch Normandie 1901, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344173307 OPENED JUL 23, 2019Closed

Fatality or catastrophe · Complete · Safety · 19 employees at the site · Closed May 11, 2020

7605 St. Charles Rock Rd., Saint Louis, MO 63133 · All Other Amusement and Recreation Industries · OSHA's record · Phone and website on Google Maps

Incident on Jul 23, 2019 (fatal): Employee drowns when pinned under commercial lawn mower in c

At 10:30 a.m. on July 23, 2019, Employee#1 was mowing a lawn with commercial lawn equipment. The mower was discovered in a creek, with the employee pinned in the water. The employee appeared to have drown.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
OSH Act Section 5(a)(1) · General Duty Clause
Serious$5,304$3,179Dec 4, 2019Final
Citation 1, item 2
29 CFR 1910.132(d)(2) · Personal protective equipment, general requirements
Serious$3,789$2,000Dec 4, 2019Final
Citation 1, item 3
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$2,273$1,000Dec 4, 2019Final
Citation 1, item 4
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$3,789$1,000Dec 4, 2019Final
Citation 1, item 5
29 CFR 1910.303(g)(2)(i) · Electrical equipment, general requirements
Serious$3,789$607Dec 4, 2019Final
Citation 1, item 6
29 CFR 1910.305(b)(1)(ii) · Electrical wiring methods
Serious$3,789$607Dec 4, 2019Final
Citation 1, item 7
29 CFR 1910.305(g)(1)(iv)(a) · Electrical wiring methods
Serious$3,789$607Dec 4, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(d)(2)

(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.305 · Electrical wiring methods

OSH Act Section 5 · General Duty Clause

Other all other amusement and recreation industries employers in Missouri

Alert subscribers get notified of each newly cited employer in Missouri the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.