Oil States Industries: OSHA inspections and violations
Arlington, Texas · Oil and Gas Field Machinery and Equipment Manufacturing · NAICS 333132
8inspections
14citation items
$7,545current penalties
Jun 3, 2016last inspection
OSHA has inspected Oil States Industries 8 times in Texas since 1982.
The latest one began on Jun 3, 2016 on a referral, in Arlington.
Those inspections ended with 14 citation items: 4 serious and 10 other-than-serious.
Penalties were first proposed at $8,090 and now stand at $7,545, 7% lower after settlements or reviews.
Electrical wiring methods comes up most often in these citations: 4 items under 1910.305.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Oil States Industries averages $7,000 (1 cited inspection).
Oil States Industries also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
The Wage and Hour Division has 1 case on it since 2015, with $14,084 in back wages owed to workers.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Arlington site logged 1 recordable injury or illness among about 213 workers: 0.4 per 100 full-time workers, against a median of 2.7 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Oil States Industries-Arlington
Arlington · 2025
213
1
0
0.4
2.7
Oil States Industries Inc. Lampasas Business Unit
Lampasas · 2025
68
1
0
1.3
2.7
Oil States Industries Corporate
Arlington · 2025
25
0
0
0.0
2.7
Oil States Lampasas
Lampasas · 2021
78
2
0
2.4
2.7
Oil States Industries - Hobby
Houston · 2016
221
1
0
0.4
2.7
Oil States Industries Custom Molded Products
Lampasas · 2016
76
1
1
1.4
2.7
Oil States Industries - Ship Channel
Houston · 2016
24
0
0
0.0
2.7
Included with any plan: 17 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Sep 15, 2016, Lampasas: Hospitalization · fractures and burns · hand(s) and arm(s), n.e.c.
An employee was attempting to remove a molded 27.5-inch rubber part from the mold using an overhead crane and a push-out barrel. When he raised the part and the core mold with the crane, he reached up under the part to apply more 4x4 wooden blocks. The part then slipped off the core, pinning his right arm between the part and the push-out barrel. He suffered a broken arm and hand, as well as a…
May 24, 2016, Arlington: Hospitalization · soreness, pain, hurt-nonspecified injury · chest, except internal location of diseases or disorders
An employee was conducting a compression test on a part when the rig holding the part failed, allowing it to strike the employee's chest.
Wage and hour cases
Cases by the Labor Department's Wage and Hour Division since 2015: unpaid minimum wage or overtime, child labor, family leave and more.
Period reviewed
Violations
Workers owed
Back wages
Penalties
Apr 5, 2012 to May 29, 2015
Arlington
4
3
$14,084
$660
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(2) Guard design. The safety guard shall cover the spindle end, nut, and flange projections. The safety guard shall be mounted so as to maintain proper alignment with the wheel, and the strength of the fastenings shall exceed the strength of the guard, except:
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.