Olin Winchester, LLC: OSHA inspections and violations
East Alton, Illinois · Small Arms Ammunition Manufacturing · NAICS 332992
6inspections
14citation items
$103,753current penalties
Feb 6, 2026last inspection
Olin Winchester, LLC has 6 OSHA inspections on record in Illinois, the first in 2018.
OSHA's last visit started on Feb 6, 2026 after a complaint, in East Alton.
Across those inspections OSHA issued 14 citation items: 11 serious and 3 other-than-serious.
OSHA proposed $189,810 in penalties. After settlements and reviews the total is $103,753, down 45%.
Most often, OSHA cited 1910.217, mechanical power presses (4 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Olin Winchester, LLC averages $17,292 over 6 cited inspections in that time.
1 inspection on this page followed a fatal incident.
Olin Winchester, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
421employers cited
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
OSHA records show Olin Winchester, LLC at 4 sites in 3 states. Together they've had 18 inspections and $184,500 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 4 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Jun 22, 2023 (fatal): Employee dies in explosion while moving shot shell primer
At 4:45 p.m. on June 22, 2023, an employee working for an ammunition manufacturer was operating a yard truck at a loading dock. The employee was moving a semi-trailer filled with seven carts of shot shell primer material from hazardous area "Zone 1" to "Zone 4". Two coworkers loaded the primer from two ovens onto portable carts which they locked into two rows inside the semi-trailer. The weather was warm and dry, and the loading dock was located outdoors. The employee was operating the truck alone and had pulled approximately 100 feet away the dock. He made a turn when an explosion occurred inside the trailer. The employee was ejected from the cab and pinned under the truck. The cab was equipped with a seat belt. The site is covered by the OSHA Process Safety Management Standard. The employer provided the Process Hazardous Analysis and Written Procedures for the loading of the semi-trailer. However, the Process Hazardous Analysis did not address the loading of the primers into to the trailer. The employee died due to the resultant pressure wave with heat and materials, which included the truck and other flying debris.
Incident on Aug 10, 2021: Employee sustains amputation injury while operating cartridg
At approximately 8:25 a.m. on August 10, 2021, Employee #1 was operating an ejection cartridge capper in building T-285. While processing, a shell failed to settle into its intended cup, prompting the employee to open the lower guard door and cut power to the machine. Reaching inside with his right hand to retrieve the fallen shell, he inadvertently extended his little finger into the punch's point of operation, which had not completed its cycle. The punch closed, resulting in an amputation of the fingertip. Employee #1 was serving as a backup operator that day, and while other employees were nearby, he was working alone on the machine. The employee was treated for the injury without hospitalization.
Incident on Oct 10, 2018: Employee injures fingertip in machine drive belt, is later a
At 7:36 p.m. on October 10, 2018, Employee #1 was attempting to get the shaker unit motor to restart at a ammunition manufacturing facility. Employee #1 was operating a primer cup shaking unit when the shaking motor stopped working. Employee #1 reached through a sliding guard and grabbed the drive belt and pulley to try and push the motor to get it going, resulting in an avulsion on a finger tip on the right hand. The employee was taken to the hospital and the finger tip was surgically amputated.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the East Alton site logged 6 recordable injuries or illnesses among about 646 workers: 0.9 per 100 full-time workers, against a median of 2.4 for its industry. Those cases cost 64 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Olin Winchester, LLC - East Alton
East Alton · 2025
646
6
4
0.9
2.4
Included with any plan: 7 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Aug 10, 2021, East Alton: Amputation · amputations · finger(s), fingernail(s), n.e.c.
An employee was grabbing a cartridge that had fallen when punches in an ejection cartridge capper came down. The employee's right little finger was amputated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) Permissible exposure limit (PEL). (1) The employer shall assure that no employee is exposed to lead at concentrations greater than fifty micrograms per cubic meter of air (50 µg/m 3) averaged over an 8-hour period.
29 CFR 1910.1025(e)(1)(i)
(e) Methods of compliance—(1) Engineering and work practice controls. (i) Where any employee is exposed to lead above the permissible exposure limit for more than 30 days per year, the employer shall implement engineering and work practice controls (including administrative controls) to reduce and maintain employee exposure to lead in accordance with the implementation schedule in Table I below, except to the extent that the employer can demonstrate that such controls are not feasible. Wherever the engineering and work practice controls which can be instituted are not sufficient to reduce employee exposure to or below the permissible exposure limit, the employer shall nonetheless use them to reduce exposures to the lowest feasible level and shall supplement them by the use of respiratory protection which complies with the requirements of paragraph (f) of this section.
29 CFR 1910.1025(i)(4)(ii)
(ii) The employer shall assure that lunchroom facilities have a temperature controlled, positive pressure, filtered air supply, and are readily accessible to employees.
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.