Optimus Industries LLC: OSHA inspections and violations
Chanute, Kansas · Power Boiler and Heat Exchanger Manufacturing · NAICS 332410
1inspections
4citation items
$34,494current penalties
Feb 8, 2022last inspection
OSHA has inspected Optimus Industries LLC once in Kansas.
The inspection began on Feb 8, 2022 on a referral, in Chanute.
That inspection ended with 4 citation items: 1 serious and 3 other-than-serious.
Penalties were first proposed at $41,020 and now stand at $34,494, 16% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Optimus Industries LLC averages $34,494 (1 cited inspection).
Optimus Industries LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Kansas · latest 90 days of OSHA records
48employers cited
Get notified the morning OSHA posts each new citation in Kansas: the employer, the site address, the rules broken and the penalty.
Incident on Jan 26, 2022: Two employees are injured by falling tubes
At 7:00 a.m. on January 26, 2022, two employees were standing on an economizer, approximately 4 feet off of the ground, attempting to plumb 6 tubing elements. The employees were working on the second "B" of four identical economizers (A,B,C,D). For the "A" economizer, the tubes were installed individually from the bottom up. At the direction of the department foreman, the assembly sequence was optimized for the "B" economizer by building tubular elements approximately 20 feet wide by 5 feet tall by 2 feet, weighing 1,050 pounds each and installing them into a fixture to prevent toppling. Six elements were installed into the fixture and all were held in place with F-Clamps at the top while the bottoms were welded in place to the header pipe. The employees were standing on top of the fixture and the elements were leaning away from them. The employees instructed a coworker, on the ground, to remove the clamps that were holding the tops of the elements in an attempt to plumb and reblock the elements manually. Employee #1 leaned two elements into the vertical position and upon leaning the third element upright, all six elements toppled toward them. The employees were not tied off nor were they required to be tied off. Notably, it had been previously assessed that any fall protection would have increased the risk of injury. Employee #2 was knocked off the fixture and fell to the ground. Employee #1 was pinned under the elements. Both employees were hospitalized with broken bones, broken ribs, fractures, and a punctured lung.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Chanute site logged 6 recordable injuries or illnesses among about 120 workers: 4.8 per 100 full-time workers, against a median of 2.8 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Chanute Manufacturing
Chanute · 2021
120
6
0
4.8
2.8
Included with any plan: 3 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Jan 26, 2022, Chanute: Hospitalization · internal injuries to organs and blood vessels of the trunk · chest, except internal location of diseases or disorders
Employees were standing on the "B" economizer, approximately 4 feet off the ground, attempting to plumb six tubing elements. The assembly sequence was optimized for the "B" economizer by building tubular elements approximately 20 feet wide by 5 feet tall by 2 feet and weighing 1,050 lbs. each and installing them into a fixture to prevent toppling. At the time of the incident, six elements were…
An employee was using C- and L-clamps to secure two half-inch steel plates, measuring 12 feet by 12 feet and weighing 400 pounds each. The steel plates were on a beam frame table. A plate moved, resulting in the amputation of the employee's left index finger between the first and second knuckles.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.110 · Storage and handling of liquefied petroleum gases
29 CFR 1910.110(f)(6)(ii)
(ii) Containers shall be in a suitable enclosure or otherwise protected against tampering.
(b) Protection from fall hazards—(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:
Alert subscribers get notified of each newly cited employer in Kansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.