Orepac Holding Company: OSHA inspections and violations
Belgrade, Montana · Other Building Material Dealers · NAICS 444190
3inspections
5citation items
$15,608current penalties
Apr 29, 2025last inspection
Since 2022, OSHA inspectors have visited Orepac Holding Company in Montana 3 times.
The most recent inspection opened on Apr 29, 2025 after a complaint, in Belgrade.
In all, OSHA issued 5 citation items: 5 serious.
The proposed penalties came to $25,239; today they stand at $15,608, 38% less.
The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 4 times.
Among retail employers, the typical cited inspection since 2015 ends with a $1,750 penalty. Orepac Holding Company averages $5,203 across 3 cited inspections.
Orepac Holding Company also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Montana · latest 90 days of OSHA records
29employers cited
Get notified the morning OSHA posts each new citation in Montana: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Belgrade site logged 6 recordable injuries or illnesses among about 41 workers: 14.9 per 100 full-time workers, against a median of 3.5 for its industry. Those cases cost 12 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
OrePac Building Products - Bozeman
Belgrade · 2023
41
6
1
14.9
3.5
Montana
Belgrade · 2019
33
5
4
15.9
3.5
Included with any plan: 5 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was operating a flat line door machine when it began to malfunction. The employee was replacing a belt on the machine that had come off when it partially amputated the employee's right index finger.
Apr 16, 2019, Belgrade: Hospitalization · puncture wounds, except gunshot wounds · abdomen, except internal location of diseases or disorders
An employee was lining up a door into a jam to staple it together with a pneumatic staple gun when the gun stapled his stomach with a 2-1/4 inch staple.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(n)(6)
(6) The driver shall be required to look in the direction of, and keep a clear view of the path of travel.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
29 CFR 1910.219(e)(1)(i)
(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.
Other other building material dealers employers in Montana
Alert subscribers get notified of each newly cited employer in Montana the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.