Minneapolis, Minnesota · Cut Stone and Stone Product Manufacturing · NAICS 327991
2inspections
7citation items
$2,225current penalties
Aug 23, 2024last inspection
Since 2019, OSHA inspectors have visited Orijin Stone LLC in Minnesota 2 times.
The most recent inspection opened on Aug 23, 2024 as a planned inspection, in Minneapolis.
In all, OSHA issued 7 citation items: 5 serious and 2 other-than-serious.
The proposed penalties came to $3,125; today they stand at $2,225, 29% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Orijin Stone LLC averages $1,112 across 2 cited inspections.
Orijin Stone LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Minnesota · latest 90 days of OSHA records
380employers cited
7 of them in the same industry
Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Minneapolis site logged 8 recordable injuries or illnesses among about 52 workers: 15.9 per 100 full-time workers, against a median of 3.5 for its industry. Those cases cost 311 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Orijin Stone
Minneapolis · 2025
52
8
6
15.9
3.5
Included with any plan: 5 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.110 · Storage and handling of liquefied petroleum gases
29 CFR 1910.110(e)(4)(iii)
(iii) Permanent and removable fuel containers shall be securely mounted to prevent jarring loose, slipping, or rotating, and the fastenings shall be designed and constructed to withstand static loading in any direction equal to twice the weight of the tank and attachments when filled with fuel using a safety factor of not less than four based on the ultimate strength of the material to be used. Field welding, when necessary, shall be made only on saddle plates, lugs or brackets, originally attached to the container by the tank manufacturer.
(5) Surface grinders and cutting-off machines. The maximum angular exposure of the grinding wheel periphery and sides for safety guards used on cutting-off machines and on surface grinding machines which employ the wheel periphery shall not exceed 150°. This exposure shall begin at a point not less than 15° below the horizontal plane of the wheel spindle. (See Figures O-12 and O-13)
(b) Protection from fall hazards—(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:
Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.