OSHA has inspected Osf International Inc 15 times in Oregon since 1995.
The latest one began on Jul 3, 2024 after a complaint, in Clackamas.
Those inspections ended with 45 citation items: 29 serious and 16 other-than-serious.
Penalties were first proposed at $9,506 and now stand at $9,326, 2% lower after settlements or reviews.
Woodworking machinery comes up most often in these citations: 7 items under 1910.213.
How that compares: the median penalty per cited inspection for hotel and restaurant employers since 2015 is $1,350, and Osf International Inc averages $1,040 (5 cited inspections).
Osf International Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Oregon · latest 90 days of OSHA records
391employers cited
Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Portland site logged 2 recordable injuries or illnesses among about 99 workers: 4.4 per 100 full-time workers, against a median of 3.0 for its industry. Those cases cost 4 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Portland site
Portland · 2025
99
2
1
4.4
3.0
Clackamas site
Clackamas · 2025
92
0
0
0.0
3.0
Tanasbourne
Hillsboro · 2025
84
2
0
5.9
3.0
Corvallis site
Corvallis · 2025
51
4
0
16.4
3.0
Old Spaghetti Factory - Salt Lake City
Portland · 2024
94
1
1
2.2
3.0
OSF International, Inc
Portland · 2024
205
2
1
4.4
3.0
Old Spaghetti Factory - Spokane
Portland · 2024
56
0
0
0.0
3.0
Old Spaghetti Factory - San Diego
Portland · 2024
73
1
0
24.0
3.0
Included with any plan: 4 more yearly logs from these sites, back to 2024, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
(b) Spray booths—(1) Construction. Spray booths shall be substantially constructed of steel, securely and rigidly supported, or of concrete or masonry except that aluminum or other substantial noncombustible material may be used for intermittent or low volume spraying. Spray booths shall be designed to sweep air currents toward the exhaust outlet.
29 CFR 1910.107(b)(5)(i)
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.