OSHA SearchOSHA records by employer

PA Transformer Technology, Inc.: OSHA inspections and violations

Canonsburg, Pennsylvania · Power, Distribution, and Specialty Transformer Manufacturing · NAICS 335311

2inspections
5citation items
$16,800current penalties
Jun 12, 2019last inspection

Since 2018, OSHA inspectors have visited PA Transformer Technology, Inc. in Pennsylvania 2 times.

The most recent inspection opened on Jun 12, 2019 on a referral, in Canonsburg.

In all, OSHA issued 5 citation items: 4 serious and 1 other-than-serious.

The proposed penalties came to $28,042; today they stand at $16,800, 40% less.

The rule cited most here is 1910.213 (woodworking machinery), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. PA Transformer Technology, Inc. averages $8,400 across 2 cited inspections.

It reported 1 severe injury to OSHA since 2015.

PA Transformer Technology, Inc.: OSHA citation items per year, 2018 to 2019
Citation items per year, by inspection date.

Pennsylvania · latest 90 days of OSHA records

285employers cited

Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Pennsylvania

Checking a subcontractor, a client or your own company? Watch PA Transformer Technology, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344073473 OPENED JUN 12, 2019Closed

Referral · Partial · Safety · 310 employees at the site · Closed Oct 25, 2022

30 Curry Street, Canonsburg, PA 15317 · Power, Distribution, and Specialty Transformer Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Jun 6, 2019: Employee amputates finger while operating band saw

At 5:00 p.m. on May 6, 2019, an employee was using a Tannewitz band saw cutting wood blocks to make winding pins. The employee was using his hand to guide the wood into the saw when the wood jerked. The employee struck his right index finger against the saw blade and amputated the finger to the second knuckle, requiring hospitalization.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(i)(1) · Woodworking machinery
Serious$13,260$8,000Jun 19, 2019Final
Citation 1, item 1b
29 CFR 1910.213(s)(9) · Woodworking machinery
Serious$0$0Jun 19, 2019Final
Citation 2, item 1
29 CFR 1910.147(c)(4)(ii) · Lockout/tagout
Other-than-serious$0$0Jun 19, 2019Final

Inspection 343357372 OPENED AUG 3, 2018Closed

Complaint · Partial · Safety · 310 employees at the site · Closed Jan 28, 2019

30 Curry Street, Canonsburg, PA 15317 · Power, Distribution, and Specialty Transformer Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.22(d)(1) · Walking-working surfaces
Serious$7,391$4,400Nov 8, 2018Final
Citation 1, item 2
29 CFR 1910.28(b)(1)(i) · Fall protection in general industry
Serious$7,391$4,400Nov 8, 2018Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Jun 6, 2019, Canonsburg: Amputation · amputations · finger(s), fingernail(s), unspecified

An employee was cutting winding pins on a band saw when the pin slipped and the employee made contact with the blade. The employee sustained an amputation to one of their fingers.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(ii)

(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(i)(1)

(i) Bandsaws and band resaws. (1) All portions of the saw blade shall be enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. Bandsaw wheels shall be fully encased. The outside periphery of the enclosure shall be solid. The front and back of the band wheels shall be either enclosed by solid material or by wire mesh or perforated metal. Such mesh or perforated metal shall be not less than 0.037 inch (U.S. Gage No. 20), and the openings shall be not greater than three-eighths inch. Solid material used for this purpose shall be of an equivalent strength and firmness. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard shall protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall

29 CFR 1910.213(s)(9)

(9) Push sticks or push blocks shall be provided at the work place in the several sizes and types suitable for the work to be done.

29 CFR 1910.22 · Walking-working surfaces

29 CFR 1910.28 · Fall protection in general industry

Other power, distribution, and specialty transformer manufacturing employers in Pennsylvania

Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.