Panel Truss - Dallas, LLC has 2 OSHA inspections on record in Texas, the first in 2015.
OSHA's last visit started on Oct 20, 2015 on a referral, in Dallas.
Across those inspections OSHA issued 5 citation items: 5 serious.
OSHA proposed $14,000 in penalties. After settlements and reviews the total is $7,000, down 50%.
Most often, OSHA cited 1910.95, noise (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Panel Truss - Dallas, LLC averages $3,500 over 2 cited inspections in that time.
Panel Truss - Dallas, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
401employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Dallas site logged 0 recordable injuries or illnesses among about 17 workers: 0.0 per 100 full-time workers, against a median of 3.9 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Panel Truss Dallas LLC
Dallas · 2021
17
0
0
0.0
3.9
Included with any plan: 5 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employee 1 was working the night shift building trusses. Employee 2 was operating the roof press. One end of the press table has gaps so that the truss can be pulled out. Employee 1 went into the gap at the end of the table to pull a truss out and the employee's right thigh was caught between the gap in the table and the edge of the press when the press was activated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(h) Radial saws. (1) The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.
(c) Hearing conservation program. (1) The employer shall administer a continuing, effective hearing conservation program, as described in paragraphs (c) through (o) of this section, whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level (TWA) of 85 decibels measured on the A scale (slow response) or, equivalently, a dose of fifty percent. For purposes of the hearing conservation program, employee noise exposures shall be computed in accordance with appendix A and Table G-16a, and without regard to any attenuation provided by the use of personal protective equipment.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.