OSHA SearchOSHA records by employer

Pentair Flow Technologies, LLC*: OSHA inspections and violations

North Aurora, Illinois · Pump and Compressor Manufacturing · NAICS 333911

1inspections
6citation items
$30,000current penalties
Feb 7, 2017last inspection

OSHA inspectors have visited Pentair Flow Technologies, LLC* in Illinois one time.

It opened on Feb 7, 2017 on a referral, in North Aurora.

In all, OSHA issued 6 citation items: 6 serious.

The proposed penalties came to $52,512; today they stand at $30,000, 43% less.

The rule cited most here is 1910.147 (lockout/tagout), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Pentair Flow Technologies, LLC* averages $30,000 across 1 cited inspection.

It reported 1 severe injury to OSHA since 2015.

Pentair Flow Technologies, LLC*: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Illinois · latest 90 days of OSHA records

421employers cited

Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Illinois

Checking a subcontractor, a client or your own company? Watch Pentair Flow Technologies, LLC* and get notified the morning OSHA posts a new citation for it.

Watch this company

Company-wide record

OSHA records show Pentair Flow Technologies, LLC* at 3 sites in 3 states. Together they've had 5 inspections and $66,979 in current penalties.

We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.

Included with any plan: the site-by-site record for all 3 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.

See plans

Inspection history

Inspection 342083177 OPENED FEB 7, 2017Closed

Referral · Partial · Safety · 199 employees at the site · Closed Jun 6, 2018

800 Airport Rd., North Aurora, IL 60542 · Pump and Compressor Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Jan 27, 2017: Employee's arm is caught in a milling machine spindle and l

At 2:15 p.m. on January 27, 2017, an employee was operating a horizontal milling machine. The employee stopped the operation to inspect the part. He opened the door and reached inside the machine. The spindle was spinning and the employee's sleeve got caught in the spindle which severely lacerated the his right arm. his right arm.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
Serious$9,054$9,054Jul 10, 2017Final
Citation 1, item 2a
29 CFR 1910.147(d) · Lockout/tagout
Serious$12,675$12,675Jul 10, 2017Final
Citation 1, item 2b
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$12,675$0Jul 10, 2017Final
Citation 1, item 4a Serious$9,054$8,271Jul 10, 2017Final
Citation 1, item 4b
29 CFR 1910.334(c)(1) · Using electrical equipment
Serious$0$0Jul 10, 2017Final
Citation 1, item 4c
29 CFR 1910.335(a)(1)(i) · Safeguards for personnel protection
Serious$9,054$0Jul 10, 2017Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Jan 27, 2017, North Aurora: Hospitalization · cuts, lacerations · arm(s), unspecified

An employee was operating a horizontal milling machine when his right arm was caught by the spindle blade and severely lacerated. The employee was hospitalized.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(6)(i)

(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

29 CFR 1910.147(d)

(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.332 · Training

29 CFR 1910.334 · Using electrical equipment

29 CFR 1910.335 · Safeguards for personnel protection

Other pump and compressor manufacturing employers in Illinois

Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.