OSHA SearchOSHA records by employer

Petroleum Producing Services, LLC: OSHA inspections and violations

Driscoll, Texas · Drilling Oil and Gas Wells · NAICS 213111

2inspections
4citation items
$42,745current penalties
Mar 19, 2025last inspection

Since 2023, OSHA inspectors have visited Petroleum Producing Services, LLC in Texas 2 times.

The most recent inspection opened on Mar 19, 2025 to follow up on an earlier case, in Driscoll and is still open.

In all, OSHA issued 4 citation items: 4 serious.

The penalties, $42,745 in total, stand where OSHA first set them.

The rule cited most here is 1910.147 (lockout/tagout), 2 times.

Among mining and oil and gas employers, the typical cited inspection since 2015 ends with a $2,886 penalty. Petroleum Producing Services, LLC averages $21,372 across 2 cited inspections.

1 inspection on this page followed a fatal incident.

Petroleum Producing Services, LLC: OSHA citation items per year, 2023 to 2025
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

393employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Petroleum Producing Services, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348118472 OPENED MAR 19, 2025Open

Follow-up · Partial · Safety · 28 employees at the site · Open

4767 Fm 665 Cr 75 & Cr 18, Driscoll, TX 78351 · Drilling Oil and Gas Wells · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
Serious$9,931$9,931Sep 12, 2025Open

Inspection 346457765 OPENED JAN 24, 2023Closed

Fatality or catastrophe · Complete · Safety · 35 employees at the site · Closed Dec 12, 2023

2008 County Road 75 Cr 75 & Cr 18, Driscoll, TX 78351 · Drilling Oil and Gas Wells · OSHA's record · Phone and website on Google Maps

Incident on Jan 24, 2023 (fatal): Employee is killed when crushed by counterweight

At 12:00 noon on January 24, 2023, an employee went to the area around the pump jack of an oil well, which had been serviced earlier that morning, to place absorbent on oils or liquids that had spilled. While placing the absorbent, the employee got struck and crushed by the counterweight of the oil well rig pump jack. The employee was killed.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$10,938$10,938Jul 18, 2023Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$10,938$10,938Jul 18, 2023Final
Citation 1, item 3
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$10,938$10,938Jul 18, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.147(c)(6)(i)

(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

Other drilling oil and gas wells employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.