Phillips-Medisize, LLC: OSHA inspections and violations
Menomonie, Wisconsin · Surgical and Medical Instrument Manufacturing · NAICS 339112
6inspections
8citation items
$31,391current penalties
Feb 18, 2026last inspection
OSHA has inspected Phillips-Medisize, LLC 6 times in Wisconsin since 2015.
The latest one began on Feb 18, 2026 on a referral, in Phillips.
Those inspections ended with 8 citation items: 5 serious and 3 other-than-serious.
Penalties were first proposed at $45,233 and now stand at $31,391, 31% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 2 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Phillips-Medisize, LLC averages $7,848 (4 cited inspections).
Phillips-Medisize, LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Menomonie site logged 6 recordable injuries or illnesses among about 283 workers: 2.3 per 100 full-time workers, against a median of 1.1 for its industry. Those cases cost 139 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Menomonie (Origen)
Menomonie · 2025
283
6
3
2.3
1.1
Menomonie (Red Cedar)
Menomonie · 2025
169
4
2
2.5
1.1
Menomonie (Oaklawn)
Menomonie · 2025
138
6
5
4.4
1.1
Phillips-Medisize, LLC Magnesium Molding
Eau Claire · 2025
81
3
1
3.8
5.4
Phillips-Medisize, LLC - Metal Injection Molding
Menomonie · 2025
59
1
1
1.8
4.0
Origen
Menomonie · 2024
313
15
10
5.4
1.1
Red Cedar
Menomonie · 2024
267
7
3
4.0
1.1
Oaklawn
Menomonie · 2024
145
1
1
0.7
1.1
Included with any plan: 68 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
On April 13, 2021, an employee was operating a walkie rider when their leg was pinned between the walkie rider and a pallet, resulting in a fractured right tibia.
An employee was removing some debris from a conveyor belt when another worker cycled the machine, causing the employee's right index finger to be crushed and partially amputated between two pallets.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
(3) Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s).
29 CFR 1910.147(d)(4)(i)
(4) Lockout or tagout device application. (i) Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.