OSHA has inspected Piedmont Propulsion Systems, LLC. once in North Carolina.
The inspection began on Jan 14, 2016 as a planned inspection, in Winston Salem.
That inspection ended with 4 citation items: 2 serious and 2 other-than-serious.
Penalties were first proposed at $1,200 and now stand at $900, 25% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Piedmont Propulsion Systems, LLC. averages $900 (1 cited inspection).
Piedmont Propulsion Systems, LLC. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
North Carolina · latest 90 days of OSHA records
228employers cited
Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Piedmont Propulsion Systems, LLC. and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Winston Salem site logged 0 recordable injuries or illnesses among about 63 workers: 0.0 per 100 full-time workers, against a median of 1.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Piedmont Propulsion Systems, LLC
Winston Salem · 2019
63
0
0
0.0
1.1
Included with any plan: 3 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(2) Quantity. The quantity of flammable liquids or liquids with a flashpoint greater than 199.4 °F (93 °C) kept in the vicinity of spraying operations shall be the minimum required for operations and should ordinarily not exceed a supply for 1 day or one shift. Bulk storage of portable containers of flammable liquids or liquids with a flashpoint greater than 199.4 °F (93 °C) shall be in a separate, constructed building detached from other important buildings or cut off in a standard manner.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.303 · Electrical equipment, general requirements
29 CFR 1910.303(g)(1)(ii)
(ii) Working space required by this standard may not be used for storage. When normally enclosed live parts are exposed for inspection or servicing, the working space, if in a passageway or general open space, shall be suitably guarded.
Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.