OSHA SearchOSHA records by employer

Pinaps LLC: OSHA inspections and violations

Altamonte Springs, Florida · Convention and Trade Show Organizers · NAICS 561920

1inspections
3citation items
$4,369current penalties
Jan 14, 2026last inspection

OSHA inspectors have visited Pinaps LLC in Florida one time.

It opened on Jan 14, 2026 after a complaint, in Altamonte Springs.

In all, OSHA issued 3 citation items: 2 serious and 1 other-than-serious.

The proposed penalties came to $7,944; today they stand at $4,369, 45% less.

Among staffing, cleaning and waste services employers, the typical cited inspection since 2015 ends with a $2,200 penalty. Pinaps LLC averages $4,369 across 1 cited inspection.

Pinaps LLC: OSHA citation items per year, 2026 to 2026
Citation items per year, by inspection date.

Want to know if OSHA cites Pinaps LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 348686619 OPENED JAN 14, 2026Closed

Complaint · Partial · Safety · 10 employees at the site · Closed Feb 17, 2026

927 Fern Street #1200, Altamonte Springs, FL 32701 · Convention and Trade Show Organizers · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.213(d)(1) · Woodworking machinery
 Serious$3,972$2,185Jan 23, 2026Final
Citation 1, item 2
29 CFR 1910.304(b)(3)(ii)(c)(3) · Grounding and circuit protection
 Serious$3,972$2,185Jan 23, 2026Final
Citation 2, item 1
29 CFR 1910.178(l)(6) · Forklifts and other powered industrial trucks
 Other-than-serious$0$0Jan 23, 2026Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.178(l)(6)

(6) Certification. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(d)(1)

(d) Hand-fed crosscut table saws. (1) Each circular crosscut table saw shall be guarded by a hood which shall meet all the requirements of paragraph (c)(1) of this section for hoods for circular ripsaws.

29 CFR 1910.304 · Grounding and circuit protection

29 CFR 1910.304(b)(3)(ii)(c)(3)

(C) Where the ground-fault circuit-interrupter protection required by paragraph (b)(3)(ii)(B) of this section is not available for receptacles other than 125-volt, single-phase, 15-, 20-, and 30-ampere, the employer shall establish and implement an assured equipment grounding conductor program covering cord sets, receptacles that are not a part of the building or structure, and equipment connected by cord and plug that are available for use or used by employees on those receptacles. This program shall comply with the following requirements:

Other convention and trade show organizers employers in Florida

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.