OSHA SearchOSHA records by employer

Plan B Services & Solutions, LLC: OSHA inspections and violations

Tulsa, Oklahoma · Other Industrial Machinery Manufacturing · NAICS 333249

2inspections
7citation items
$5,938current penalties
Jul 18, 2017last inspection

OSHA has inspected Plan B Services & Solutions, LLC 2 times in Oklahoma since 2014.

The latest one began on Jul 18, 2017 on a referral, in Beggs.

Those inspections ended with 7 citation items: 6 serious and 1 other-than-serious.

Penalties were first proposed at $10,963 and now stand at $5,938, 46% lower after settlements or reviews.

Lockout/tagout comes up most often in these citations: 3 items under 1910.147.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Plan B Services & Solutions, LLC averages $2,738 (1 cited inspection).

Plan B Services & Solutions, LLC: OSHA citation items per year, 2014 to 2017
Citation items per year, by inspection date.

Oklahoma · latest 90 days of OSHA records

53employers cited

Get notified the morning OSHA posts each new citation in Oklahoma: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Oklahoma

Checking a subcontractor, a client or your own company? Watch Plan B Services & Solutions, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342472131 OPENED JUL 18, 2017Closed

Referral · Partial · Safety · 13 employees at the site · Closed Jan 30, 2018

6615 Hwy 75 Alt., Beggs, OK 74421 · Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance · OSHA's record · Phone and website on Google Maps

Incident on Jul 12, 2017: Employee injures leg in running machine when struck by rotat

At approximately 2:45 p.m. on July 12, 2017, Employee #1 and a coworker were repairing a shot blast machine. Employee #1 entered the machine to troubleshoot, while the machine was not operating. However, the machine was not powered down or turned off. As Employee #1 troubleshooted inside the machine, his left foot and lower left leg were lacerated and fractured by spinning parts of a lower blast wheel. Employee #1 was transported to a medical center, where he received treatment and was then hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(2)(ii) · Lockout/tagout
Serious$4,563$2,738Dec 11, 2017Final
Citation 1, item 1b
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$0$0Dec 11, 2017Final
Citation 1, item 1c Serious$0$0Dec 11, 2017Final

Inspection 340135367 OPENED DEC 11, 2014Closed

Planned · Partial · Safety · 13 employees at the site · Closed May 27, 2015

25 N. Lawton Ave., Tulsa, OK 74127 · Other Industrial Machinery Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.178(l)(7) · Forklifts and other powered industrial trucks
Serious$2,000$1,000Mar 16, 2015Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$2,400$1,200Mar 16, 2015Final
Citation 1, item 3
29 CFR 1910.243(c)(1) · Guarding of portable powered tools
Serious$2,000$1,000Mar 16, 2015Final
Citation 2, item 1
29 CFR 1910.252(c)(1)(iv) · Welding fire safety
Other-than-serious$0$0Mar 16, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(2)(ii)

(ii) If an energy isolating device is capable of being locked out, the employer's energy control program under paragraph (c)(1) of this section shall utilize lockout, unless the employer can demonstrate that the utilization of a tagout system will provide full employee protection as set forth in paragraph (c)(3) of this section.

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(7)(iii)(a)

(A) Retraining shall be provided for all authorized and affected employees whenever there is a change in their job assignments, a change in machines, equipment or processes that present a new hazard, or when there is a change in the energy control procedures.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.212 · Machine guarding

29 CFR 1910.243 · Guarding of portable powered tools

29 CFR 1910.252 · Welding fire safety

Other other industrial machinery manufacturing employers in Oklahoma

Alert subscribers get notified of each newly cited employer in Oklahoma the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.