OSHA SearchOSHA records by employer

Praxis Industries: OSHA inspections and violations

Ennis, Texas · Plastics Plumbing Fixture Manufacturing · NAICS 326191

1inspections
5citation items
$10,640current penalties
Jan 8, 2019last inspection

OSHA inspectors have visited Praxis Industries in Texas one time.

It opened on Jan 8, 2019 as a planned inspection, in Ennis.

In all, OSHA issued 5 citation items: 5 serious.

The proposed penalties came to $21,281; today they stand at $10,640, 50% less.

The rule cited most here is 1910.305 (electrical wiring methods), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Praxis Industries averages $10,640 across 1 cited inspection.

Praxis Industries: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

398employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Praxis Industries and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343698601 OPENED JAN 8, 2019Closed

Planned · Complete · Safety · 55 employees at the site · Closed Feb 14, 2019

1504 S. Kauffman St., Ennis, TX 75119 · Plastics Plumbing Fixture Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.37(b)(2) · Exit routes
Serious$3,381$2,320Jan 22, 2019Final
Citation 1, item 2
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$4,508$3,320Jan 22, 2019Final
Citation 1, item 3
29 CFR 1910.303(e) · Electrical equipment, general requirements
Serious$3,381$1,000Jan 22, 2019Final
Citation 1, item 4
29 CFR 1910.305(g)(1)(iv)(a) · Electrical wiring methods
Serious$6,630$2,000Jan 22, 2019Final
Citation 1, item 5
29 CFR 1910.305(g)(2)(ii) · Electrical wiring methods
Serious$3,381$2,000Jan 22, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.305 · Electrical wiring methods

29 CFR 1910.305(g)(1)(iv)(a)

(A) As a substitute for the fixed wiring of a structure;

29 CFR 1910.305(g)(2)(ii)

(ii) Flexible cords may be used only in continuous lengths without splice or tap. Hard-service cord and junior hard-service cord No. 14 and larger may be repaired if spliced so that the splice retains the insulation, outer sheath properties, and usage characteristics of the cord being spliced.

29 CFR 1910.37 · Exit routes

Other plastics plumbing fixture manufacturing employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.