OSHA SearchOSHA records by employer

Precision Turning Corporation: OSHA inspections and violations

Live Oak, Florida · Machine Shops · NAICS 332710

2inspections
2citation items
$2,013current penalties
May 29, 2025last inspection

Precision Turning Corporation has 2 OSHA inspections on record in Florida, the first in 2023.

OSHA's last visit started on May 29, 2025 as a planned inspection, in Live Oak.

Across those inspections OSHA issued 2 citation items: 1 serious and 1 other-than-serious.

OSHA proposed $2,953 in penalties. After settlements and reviews the total is $2,013, down 32%.

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Precision Turning Corporation averages $1,006 over 2 cited inspections in that time.

Precision Turning Corporation also files yearly injury logs with OSHA, summarized below.

Precision Turning Corporation: OSHA citation items per year, 2023 to 2025
Citation items per year, by inspection date.

Florida · latest 90 days of OSHA records

320employers cited

5 of them in the same industry

Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Florida

Checking a subcontractor, a client or your own company? Watch Precision Turning Corporation and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348313198 OPENED MAY 29, 2025Closed

Planned · Partial · Health · 22 employees at the site · Closed Nov 25, 2025

715 Goldkist Boulevard, Live Oak, FL 32064 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1904.41(a)(1)(i) · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA
Other-than-serious$603$603Aug 29, 2025Final

Inspection 347128258 OPENED NOV 28, 2023Closed

Planned · Partial · Safety · 20 employees at the site · Closed Jun 13, 2024

715 Goldkist Boulevard, Live Oak, FL 32064 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$2,350$1,410Feb 16, 2024Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Live Oak site logged 0 recordable injuries or illnesses among about 22 workers: 0.0 per 100 full-time workers, against a median of 2.7 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
Precision Turning Corporation
Live Oak · 2025
22 000.02.7

Included with any plan: 1 more yearly log from these sites, back to 2024, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.41 · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA

29 CFR 1904.41(a)(1)(i)

(a) Basic requirements—(1) Annual electronic submission of information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses. (i) If your establishment had 20-249 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

Other machine shops employers in Florida

Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.