Pritchard Brown, LLC: OSHA inspections and violations
Rosedale, Maryland · Fabricated Structural Metal Manufacturing · NAICS 332312
5inspections
9citation items
$1,947current penalties
Jun 1, 2018last inspection
Since 1983, OSHA inspectors have visited Pritchard Brown, LLC in Maryland 5 times.
The most recent inspection opened on Jun 1, 2018 as a planned inspection, in Baltimore.
In all, OSHA issued 9 citation items: 6 serious and 3 other-than-serious.
The proposed penalties came to $3,800; today they stand at $1,947, 49% less.
The rule cited most here is 1910.334 (using electrical equipment), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Pritchard Brown, LLC averages $1,297 across 1 cited inspection.
Pritchard Brown, LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Maryland · latest 90 days of OSHA records
194employers cited
3 of them in the same industry
Get notified the morning OSHA posts each new citation in Maryland: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Baltimore site logged 1 recordable injury or illness among about 120 workers: 0.8 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 11 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Pritchard Brown LLC
Baltimore · 2025
120
1
1
0.8
3.6
Included with any plan: 4 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(h) Radial saws. (1) The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
Alert subscribers get notified of each newly cited employer in Maryland the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.