OSHA inspectors have visited PSS Industrial Group in Texas one time.
It opened on Nov 8, 2017 as a planned inspection, in Houston.
In all, OSHA issued 4 citation items: 4 serious.
The proposed penalties came to $16,814; today they stand at $10,088, 40% less.
The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.
Among wholesale employers, the typical cited inspection since 2015 ends with a $3,425 penalty. PSS Industrial Group averages $10,088 across 1 cited inspection.
PSS Industrial Group also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
393employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Houston site logged 1 recordable injury or illness among about 165 workers: 0.6 per 100 full-time workers, against a median of 2.3 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Ella - North Houston
Houston · 2021
165
1
0
0.6
2.3
Prowler Super Holdings Corp - Houston Corp
Houston · 2018
70
0
0
0.0
1.4
Included with any plan: 1 more yearly log from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.